Examples of using Surface currents in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
And the red are the warm surface currents.
Figure 4: Surface currents on the antenna at 6.43 GHz.
Quicklook maps of measured surface currents.
Surface currents generally move outward from the centre of the system.
The electromagnetic waves create surface currents that mix and reradiate see Figure 7.
The authors also identified 109 trajectories(27%)that were driven by both winds and surface currents.
Then there are the surface currents, these are largely driven by the winds.
Above a few tens of MHz most conductors and metal items(such as the cases of filters) are several skin-depths thick,so RF currents travel as surface currents in them.
Unlike surface currents, deep ocean currents are driven primarily by changes in the density of seawater.
An important consideration in the design of thestructure of an RF Reference is that'surface currents' must be able to flow freely where they will, all over the area being used.
Large-scale surface currents are already known to exist, and major currents below the ocean surface, too, are being found.
The findings suggest that two patches of ocean, each randomly located anywhere in the surface ocean,can be connected by surface currents on timescales of less than ten years.
The visualization shows ocean surface currents around the world during the period from June 2005 through December 2007.
Not only should these impedances be much lower than that of the shunt capacitors in the filters,they should also allow the internal and external CM surface currents to find their optimum return paths.
Using satellite imagery and modelled surface currents, researchers are able to track floating algae and forecast likely stranding events[27], 28.
To determine where the plastic is coming from, researchers used data from more than 1,600 satellite-tracked drifting buoys deployed between 1989 and2009 to map surface currents in the region.
From observation of the surface currents in Figures 1-3 it is evident that the currents on the head, arm and chest region are much larger with the key held to the mouth region than with the key extended.
The middle'ground' terminal connects directly to the shield,using a 360ø electrical bond so that the internal and external surface currents stay separated on either side of the shield, as shown in see Figure 3U, allowing the shield to function correctly.
Figure 9: Surface current distribution on the patches.
Surface current data in near real time.
E/H/B, conduction current, surface current, rotating B near fields, in addition to dissipated power density.
IPRC has taken the lead in tracking the debris using ourown unique high-resolution global ocean surface current analysis Picture 2.
Figures 7 and8 show the resultant steady-state E field and surface current distributions respectively.
Wide area synoptic surface current data can be valuable in characterising offshore conditions and in forecast model initialisation and validation.
Wamos® II is an industry-proven X-band radar-based wave and surface current monitoring system developed by OceanWaveS GmbH.
ROCIS combines the operational oceanographic, geospatial, and aerial survey skills of Fugro with the advanced image processing andremote sensing expertise of Areté Associates to provide high resolution surface current mapping over large offshore areas on a near real-time and synoptic basis.
Accurate and timely measurements of ocean surface current can impact a variety of marine activities, both offshore and in coastal marine environments.