Examples of using Engine speed in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Engine speed.
Service interval reset and engine speed signal.
At engine speed.
Home Powertrain Gasoline Technologies Control System Engine Speed Sensors.
Engine Speed: RPM.
RAMPING circuit. After engine speed ramping has been.
Engine Speed(r/min).
Was due to an increase in engine speed and average effective pressure.
Engine Speed(RP) RPM(Unit).
For the driver, this means improved torque across all engine speeds.
WP Engine Speed Test.
Rental Trailer Genset 23.3:1 Compression Ratio 1500 R/ Min Engine Speed.
The engine speed immediately.
Hp Multi- Stage High Pressure Water Pump 460m³ Water Flow 1450rpm Engine Speed.
Rated engine speed 2000 r/min.
Noise Proof Yanmar Generator 1500rpm Or 1800rpm Engine Speed 50Hz Frequency.
Engine speed and vehicle speed. .
Analog oil pressure, water, temperature, fuel level, battery,voltage, engine speed(pick-up).
The exact engine speed is not critical.
KVA Air Cooled Diesel Generator Set With 3000/3600rpm Engine Speed Rpm.
WP Engine Speed Test at WebpageTest. org.
Analog Oil pressure, Water temperature,battery voltage, engine speed r.p. m, hours counter.
And its constant engine speed saves battery power and reduces friction, prolonging service life.
One Reply to“P0323- Crankshaft position(CKP)sensor/engine speed(RPM) sensor circuit intermittent”.
Especially at high engine speeds, some of the gasoline is used for cooling instead of for propulsion.
Save on fuel: Save on fule by automitically adjusting the engine speed to produce only the power you need.
This novel feature ensures stable hydraulic pressure at any shift point, which facilitates a high degree of precision and control needed to deliver ultra-fast, smooth and precise shifts throughout the engine speed range.
Instrument board configuration: Speedometer, water temperature,fuel gauge, engine speed recorder, alarm indicator, gear position indicator light, turning indicator light.
The following information is continuously collected: vehicle location,g-force/acceleration data, and engine-related data such as fuel consumption, valve positions, engine speed, and mileometer value.
This is because when you step on the gas, the engine speeds up and pumps more fluid into the torque converter, causing more torque to be transmitted to the wheels.