Examples of using Oxygen content in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
High oxygen content.
Vitalizer Plus increases oxygen content.
Oxygen content:≤1%.
Element analysis results show oxygen content up to 46 percent.
Oxygen Content≤18 New PPMA.
Compressed air is pumped into a liquid to boost its oxygen content.
Oxygen content: less than 2PPm.
The stability is good and the oxygen content is always below 5PPm at any time;
Oxygen content of tungsten trioxide?
This process can provide drastically reduced oxygen content in bottles/.
Oxygen Content: 3-5L Water Pealing Tips: 12 Rind.
T33 can remove the smell further, increase oxygen content and inhibit bacterial growth.
Good stability, oxygen content can be controlled to be less than 5ppm at any time.
The RF and Red, Blue and Green light therapy generate heat, increasing the oxygen content of skin cells.
High stability, low oxygen content, can be controlled within 1 PPm.
Sodium Percarbonate can generate oxygen very qiuckly, andcan improve the oxygen content of water bodies.
Clean organization, low Oxygen content, alloy elements concent breaking through the limit.
A Study on the Variation of Elements Loss of Wires and Oxygen Content of Weld Metal in GMAW.
Composite powder size, the oxygen content of the oxide powder milling time varies with the following table.
This is because- in contrast to other food- fruit and vegetables continue breathing after the harvest and consequently require an oxygen content in the packaging.
(2) water injection,immediately increase the oxygen content in the water, regulate water quality.
In the flue gas oxygen content of less than 14% of the collection can be used in dust, but the temperature should be lowered accordingly;
Using state-of-the-art and safe laser technology, the oxygen content can be reliably determined in transparent packaging.
Oxygen content adjustment: This function monitors the oxygen content in the flue gas, and transmits the data to the control in real time.
Apart from impurities content, oxygen content should be also controlled within a certain limit.
Their effect is that of far infrared therapy, healthy skin and hair, toxin andwaste drain from the body, increased oxygen content in blood, and boosted immunity.
So the working environment requires the oxygen content less than 14%(Vol.), and the oxynitride content is less than 600mg/Nm3.
Oxygen content is measured by elemental analysis by pyrolyzing a sample in a furnace operating at 1300° C. or above.
A Study on the Variation of Elements Loss of Wires and Oxygen Content of Weld Metal in GMAW.
The oxygen content of the tungsten and copper material is very low, high purity, high temperature sintering method suitable for manufacture of the mass fraction of copper is not greater than 15% of the tungsten and copper material.