PRE-SETTING Meaning in Malay - translations and usage examples

• pra-tetapan
• pra-penetapan

Examples of using Pre-setting in English and their translations into Malay

Four pressure pre-setting stages.
Empat tekanan peringkat pra-tetapan.

Pre-setting pressure: 220bar or customized.
Tekanan pra tetapan: 220bar~ 230bar atau disesuaikan.

Continuously variable speed control, pre-setting function.
Kawalan laju pembolehubah yang berterusan, fungsi pra-tetapan.

Factory pre-setting pressure available for quick replacement.
Kilang tekanan pra-tetapan tersedia untuk penggantian cepat.

The error means that Yandex does not allow sending from their boxes without pre-setting in the account Yandex.
Kesilapan bermakna bahawa Teman, tidak membenarkan menghantar dari kotak mereka tanpa pra-menetapkan dalam akaun.

All pressure is pre-setting before delivery, 100% high pressure tested.
Semua tekanan adalah pra-tetapan sebelum penghantaran, 100% tekanan tinggi diuji.

Electric Loop Lubrication System design is usually within 5 minutes of oiling time(up to 8 minutes within) design, hydraulic valve standard pre-setting pressure to 5MPa.
Reka bentuk Sistem Lubrication Electric Loop biasanya dalam masa 5 minit masa pelepasan( sehingga 8 minit dalam) reka bentuk, tekanan injap hidraulik pra-penetapan standard untuk 5MPa.

When the operation pressure at the T port reaches the valve pre-setting pressure, the cartridge valve starts to open and let the flow out through T port to oil tank.
Apabila tekanan operasi di pelabuhan T mencapai injap tekanan pra-tetapan, injap kartrij mula membuka dan membiarkan aliran keluar melalui T pelabuhan untuk tangki minyak.

The pump P2 supplies hydraulic oil constantly at lower side, shuttle valve V2 balances the return pressure does not exceed the pre-setting pressure of pressure relief valve V3.
Bekalan pam P2 minyak hidraulik sentiasa di sisi yang lebih rendah, injap ulang-alik V2 mengimbangkan tekanan pulangan tidak melebihi tekanan pra-penetapan injap pelega tekanan V3.

In the first turn, individual counseling implies a great psychological pre-setting of the psychologist and the client on the process, then a long and often difficult conversation between the consultant and the subject, after which there is a long period of searching for a way out of the difficulties described by the client and directly solving the problem.
Pada giliran pertama, kaunseling individu membayangkan psikologi pra-penentu psikologi dan pelanggan dalam proses itu, maka perbualan yang panjang dan sering sukar antara perunding dan subjek, selepas itu terdapat masa yang panjang mencari jalan keluar dari kesulitan yang dijelaskan oleh klien dan secara langsung menyelesaikan masalah itu.

The time relay in the electronic control cabinet⑤ enables the lubrication system to automatically operate according to the pre-setting interval time as grease or oil supply.
Penyambungan masa dalam kabinet kawalan elektronik membolehkan sistem pelinciran untuk beroperasi secara automatik mengikut masa selang masa yang ditetapkan sebagai bekalan gris atau minyak.

The end of the oil supply pipe is equipped with pressure control valve or pressure switch valve or two pressure switch valve④, when the end pressure reaches the pre-setting value, send a signal to the electric control cabinet, directional valve 1a switches, the lubrication pump① stops the system to work once the grease or oil feeding is completed.
Akhir paip pembekalan minyak dilengkapi dengan injap kawalan tekanan atau injap suis tekanan atau injap suis tekanan dua hala, apabila tekanan akhir mencapai nilai pra-penetapan, menghantar isyarat kepada kabinet kawalan elektrik, injap arah suis 1a, pelinciran pam menghentikan sistem untuk berfungsi sebaik sahajagris atau makanan minyak selesai.

BM10PND hydraulic manifold, parallel circuit normal flow with DBDS10 cavity manifold is mounted with DBDS10 pressure relief valve through the line of P and T port, the DBDS relief valve is used for maintaining the hydraulic pressure in hydraulic systems, in order to protect the hydraulic devices in normal hydraulic pressure operation, there are 6 pre-setting pressure stage for relief valve is available.
BM10PND manifold hidraulik, selari litar aliran biasa dengan DBDS10 rongga manifold dipasang dengan DBDS10 injap pelega tekanan melalui keturunan P dan T pelabuhan, injap pelega DBDS digunakan untuk mengekalkan tekanan hidraulik dalam sistem hidraulik, untuk melindungi peranti hidraulik beroperasi tekanan hidraulik biasa, terdapat 6 peringkat tekanan pra-penetapan untuk injap pelega boleh didapati.

While the action of dual line lubrication distributor② is completed, the supplied pressure increasing sharply, until the oil pressure reaches the pre-setting value to determine whether the lubrication system has been completed of operation.
Walaupun tindakan pengedar pelinciran talian dua selesai, tekanan yang dibekalkan meningkat dengan ketara, sehingga tekanan minyak mencapai nilai pra-penetapan untuk menentukan sama ada sistem pelinciran telah selesai operasi.