Examples of using Sound source in English and their translations into Malay
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Support recording from any sound source.
Turn off sound source such as radio or television.
Flat response curve for accurate reproduction of sound sources.
Otherwise, the fidelity of the sound source and the resolution of the source frequency will be directly affected.
You should also develop the ability to identify the location of the sound source.
The series is equipped with three sets of stereo sound source input ports, four microphone input ports, a stereo li… view.
Although you hear sounds in your ears, there's no external sound source.
A sound source such as a compact disc player or radio may be connected to a PA system so that music can be played through the system.
The crumb can easily determine the location of the sound source and turn his head to it.
Even though we have the most powerful microphone in the worldis worthless if it is too far from the sound source.
The software uses a microphone to record the sound sources and compares the fragments of melody with the database of the application.
To make a capture audio quality,we need a good microphone placed close to the sound source.
Recording of the background sound source, recording through the MIC or LINE interface on the panel, recording up to 4 hours when configuring the factory song;
It may be created by other means, e.g.(1) chemically using explosives, or(2) airguns or(3)plasma sound sources.
Another feature of our perception of supersonic object is that we hear the sound source at two different location as the same time, as illustrated in Figure 2.
Most sound cards have a line inconnector where the sound signal from a cassette tape recorder or similar sound source can be input.
Inside the cone,the frequency rapidly decreases to infrasonic ranges and the sound source appears at two places at the same time, mimicking the double-lobed radio sources. .
Ambient audio recording is made through the phone's microphone,and of course it's important to be close to the sound source, to have a good record.
To connect an Acoustic sound source to a sound system, you usually need to use a microphone to convert the"acoustic" sound into an"electronic signal".
When two figure-eight microphones are used,facing±45° with respect to the sound source, the X-Y setup is called a Blumlein Pair.
Occasionally, the acoustic pulse may be created by other means, e.g.(1) chemically using explosives, or(2) airguns or(3)plasma sound sources.
It allows recording from any sound source, such as microphone, line in or any sounds currently playing on your PC(internet radio, movie sounds, etc.).
It increases the apparent volume(loudness) of a humanvoice, musical instrument, or other acoustic sound source or recorded sound or music.
A PA system may include multiple microphones or other sound sources, a mixing console to combine and modify multiple sources, and multiple amplifiers and loudspeakers for louder volume or wider distribution.
Also, a sound card has a"line in" connectorwhere the sound signal from a cassette tape recorder or similar sound source can be connected to.
An audio engineer(also known as a sound engineer or recording engineer)[1][2] helps to produce a recording or a live performance,balancing and adjusting sound sources using equalization, dynamics processing and audio effects, mixing, reproduction, and reinforcement of sound. .
This coincident technique employs a bidirectional microphone facing sideways and a cardioid(generally a variety of cardioid, although Alan Blumlein described the usage of an omnidirectional transducer in his original patent)at an angle of 90° facing the sound source.
Reverberation, in psychoacoustics and acoustics, is a persistence of sound after the sound is produced.[1] A reverberation, or reverb, is created when a sound or signal is reflected causing numerous reflections to build up and then decay as the sound is absorbed by the surfaces of objects in the space- which could include furniture, people, and air.[2]This is most noticeable when the sound source stops but the reflections continue, their amplitude decreasing, until zero is reached.