Examples of using Static pressure in English and their translations into Malay
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Is the static pressure.
Static pressure bearing, running smoothly and reliably;
And is static pressure.
It has high stability, good reliability, high static pressure.
That is static pressure.
Differential Pressure Sensor has high stability,good reliability, high static pressure.
This is static pressure.
These exhuast fans are designed for commercial applications requiringhigh volume of air at low to medium static pressures.
P= Static pressure.
P{\displaystyle p} is the static pressure.
P is static pressure.
They are generally poppet valves with static pressure imbalance.
Water static pressure Max. 25bar.
The side port oil fluid balances the static pressure of the valve spool.
Over static pressure≤5X rated range or.
Spirals tube are often full of materials, and the static pressure of granular materials is relatively high.
Under 2000N static pressure for 1 minute(>= 20J. able to absorb more than 75% hit and protection for more than 35J stab energy).
Equipped with guide for static pressure lubrication system.
An aircraft Machmeter or electronic flight information system(EFIS)can display Mach number derived from stagnation pressure(pitot tube) and static pressure.
P is the static pressure.
The difference between the static pressures at both ends of the main spool overcomes the spring force and the hydraulic force, pushing the main spool and opening the related chamber.
As long as the solenoid force overcomes the spring force and static pressure, the pilot valve core can be removed.
The hammering force is about 200~300N static pressure to make up for a small amount of positional deviation that may occur during processing, and the theoretical line contact is actually changed.
The key factors in MICROFLOW airdiffuser design are fabric porosity, static pressure, and diffuser length and diffuser diameter.
When the use of the static pressure, the pressure has a slow decline.
Direct-Acting Spool Valve: The factors affecting the spool switching range of the direct-acting spool solenoid valve is mainly the solenoid force of the coil,the spring force, the static pressure of the pressure medium to the valve spool, the hydraulic force and the friction force.
The air needs to consume certain static pressure to overcome the resistance from the filter, so that it can pass through the filter.
The cylinder adopts the unique non-frictionguiding technology of the oil film without sealing static pressure support, the machining clearance is controlled within 0.02 mm, the precision is high.
Filling pressure: 20bar. Static pressure: greater than 18bar.
Lubricating system HSDR series is the lubrication system with high and low pressure controls, is used for grinding machines with double slide shoe dynamic static pressure bearing, rotary kiln equipment where needs grease lubrication system, the working medium viscosity grade of lubricating system HSDR series is N22~ N460(equivalent to ISO VG22~ 460) of all kinds of industrial lubricants.