Examples of using Mode button in English and their translations into Norwegian
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Press the mode button and see if it works.
The hearing aid body has the trimmer mode button.
The mode button is available for changing units of measure.
Change Calculator mode to Base with Mode button.
Press the mode button, there are 8 massage modes for your selection.
Test: Start the charging again by pressing on the mode button.
Click the exit Block mode button or press Space to exit Block Mode. .
Try first to restart the programme by pressing the Mode button.
To switch to aware mode, press the mode button on the side of the remote.
Pick a pencil or paint brush andclick the mask mode button.
By pressing the Mode button to change to different modes----the LCD images will change.
You will enter expert mode by pressing the purple expect mode button.
Select the required programme by pressing the Mode button, and the first light,"Check" shows.
It used to work well, butnow nothing happens when I press the mode button.
Choose the required programme by pressing the Mode button, and the first light,"Check" shows.
There's no mode button- simply plug it into the mains and connect the battery cables to start charging.
Reconditioning is activated by pressing the Mode button and selecting"Recond".
When the user changes programme orcycles through the charging modes by pressing the Mode button.
Hit the Fiesta Mode button to enjoy the high sound pressure of the party hall in any environment, even outside.
Remove your toothbrush from the charger orpress the power or mode button on your handle.
Just above the mode button in the center of the control box you will see an indicator LED lamp that glows when the output pulses are live.
If the CAN bus system has closed the 12 V outlet,you need to press the Mode button to open the port again.
If you can't change the charging mode by pressing the mode button regardless of which battery you are trying to charge, the charger is probably faulty.
The Pulse III Duo has three buttons on it, on the left is the power on/off button andthat also acts as the mode button.
To activate the'Flick' mode you simply press the mode button for two seconds to activate this feature.
Switch on by pressing the power button once. Change the mode between SCAN and TARGET by pressing the mode button once.
You press the power button to switch on and off again and the mode button allows you to cycle through the five operating modes. .
There may be some sensitive areas where the sensation is either unpleasant or perhaps in rare cases slightly painful, then it's better to use programme S with SQOOM m2, only ultrasound, orswitch off the function ION with the mode button when treating with SQOOM m1 in these areas.
It's simple to use as it doesn't have a programme button( mode button)- it starts working as soon as it's connected to a battery and is plugged into a wall socket.
Between the output level buttons is the power button used to switch the unit on and off together with a mode button and a selection button. .