Examples of using Surface of titanium in English and their translations into Norwegian
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
There are many ways to remove the oil on the surface of titanium standard parts.
(2) The surface of titanium is smooth and has low adhesion to prevent scaling.
Hanging ash: hanging ash refers to the oxides attached to the surface of titanium alloy after pickling.
The surface of titanium is boronizing to form TiB2 phase, and the hardness is very high.
The passivation film on the surface of titanium and its alloy has high strength.
And the whole surface of titanium pot is relatively soft, prone to scratches, easy to clean and beautiful.
When the heating temperature reaches 600 °C-700 °C,the oxide film on the surface of titanium will become thicker;
Anodizing the surface of titanium can be done by the use of heat but the results are not easily controlled.
(l) The surface of titanium is not easy to wet, so the vapor orgaseous medium condenses on the surface of titanium to form droplets.
Clinically, sandblasting roughening treatment is often used, butsand blasting will constitute the pollution of alumina on the surface of titanium.
(3) carbon films were coated on the surface of titanium by plasma carburizing, in order to improve the corrosion resistance.
Corrosion resistance: Due to the high affinity of oxygen to titanium, there is often a thin andstrong oxide film on the surface of titanium.
This oxide film not only protects the surface of titanium, but also is the fundamental source of titanium color change.
The solid limit of hydrogen in titanium is very small(about 20 ppm), and when it exceeds the limit, hydride(TtH2)is precipitated on the surface of titanium.
The paint on the surface of titanium standard parts is the biggest problem that will affect the normal use, so it will be cleaned regularly.
Due to the good corrosion resistance of titanium, deposits such as sediment anddirt do not easily adhere to the surface of titanium, which helps to increase the flow rate of water.
When oxygen is absorbed into the surface of titanium when the metal is hardened, it can greatly increase the hardness of the surface layer.
The main reason for the failure of titanium anode is the diffusion of new ecological oxygen generated by oxygen evolution reaction to the surface of the electrode,thus on the surface of titanium.
Perhaps the coating of such compounds on the surface of titanium is beneficial to titanium and porcelain, and further research is needed.
Method for polishing the surface of titanium and titanium-containing alloys by using different specifications of soft cloth or black hair brush, dipped in titanium and titanium-containing alloys special polishing paste.
When the titanium standard parts are processed, the surface of the titanium will be smoother, which is beneficial to the later cleaning.
Surface of folded titanium wire Pickling surface bright surface Folding titanium wire use.
In the production practice, the surface of the titanium crucible is first cleaned, and the outer skin is peeled off;
The surface of the titanium rod and the titanium alloy casting surface can be ground.