Examples of using Luns in English and their translations into Polish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Financial
-
Official/political
-
Programming
-
Computer
Muns or Luns.
There are two types of LUNs available in QTS.
LUNs are automatically assigned when they are created.
Read-only: The connected initiator can only read the data from the LUNs.
Striped LUNs write data across multiple physical drives.
You can use any of the following interfaces to expose disks or LUNs.
The maximum number cloud volumes and/or LUNs is determined by the NAS RAM size.
Host 2 connect to the same iSCSI target which has 3 LUNs.
Simple LUNs use only one physical drive
A single cloud storage space can accommodate multiple cloud volumes and/or LUNs.
Create iSCSI targets with LUNs for the VM and its data on the NAS.
Snapshot Agent does not support a LUN that is mapped to a target with multiple LUNs.
In this practice, we will use four LUNs as an extended datastore in VMware.
The LUNs can be flexibly mapped to,
When you need to extend VMware ESXi datastores with multiple LUNs, we recommend using thick volumes.
Ensure that the disks(LUNs) that you want to use in the cluster are exposed to the servers you will cluster
manually assign LUNs to it.
The maximum capacity for volumes and LUNs depends on both the capacity of the drives
make the disks or LUNs accessible to the new cluster.
The types of LUNs that you can create depend on the types of LUNs that are supported by each of your storage subsystems.
In most cases, the storage should contain multiple, separate disks(LUNs) that are configured at the hardware level.
all servers that log on to that target will have access to the LUNs assigned to it.
We do not recommend extending VMware ESXi datastores with multiple LUNs, if any of the LUNs have thin-provisioned volumes.
the space is then available for creating new LUNs.
Mirrored LUNs are fault-tolerant LUNs that provide data redundancy by creating identical copies of the LUN on two physical drives.
When you remove a target, all initiators currently logged on to that target will no longer be able to access the LUNs that are assigned to that target.
If the target hosts multiple LUNs, the IO requests for these LUNs will be served by the same thread set, which results in data transfer bottleneck.
you can configure the connections that servers in your SAN will use to access the LUNs that you create on your storage subsystems.
Striped LUNs with parity are fault-tolerant LUNs with data
Logical Unit Numbers(LUNs) of an external storage device.