Examples of using Network access server in English and their translations into Polish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Financial
-
Official/political
-
Programming
-
Computer
Configuring network access servers.
Enable EAP as an authentication protocol on the network access server.
Install and configure network access servers RADIUS clients.
The network access server then forwards the EAP message to the remote access client.
see your network access server documentation.
Under Type of network access server, select Health Registration Authority,
The NPS proxy is configured by adding each network access server as a RADIUS client.
Configure network access servers as RADIUS clients in NPS.
When a connection is made, the remote access client negotiates the use of EAP with the network access server.
In both cases, these network access servers must meet the following requirements.
The Cisco AAA server sends the network access profile to the network access server the switch, AP, or router.
A network access server(NAS) is a device that provides some level of access to a larger network. .
In this configuration, the network access server is only a pass-through device.
Network access servers that provide remote access connectivity to an organization network
For wide area network(WAN) environments, network access servers should provide the following.
A network access server running as a stand-alone server
In addition to configuring a new RADIUS client, you must also configure the network access server so that it can communicate with NPS.
On the RADIUS proxy, the network access server is configured as a RADIUS client; and on each RADIUS server,
the EAP message and sends a RADIUS-encapsulated EAP message back to the network access server.
In addition, there are filtering features that the network access servers should support to provide enhanced security for the network. .
with information that allows the network access server to communicate with NPS servers. .
This allows the network access servers, which create Access-Request messages based on information they receive from access clients,
Support for accounting interim requests, which are sent periodically by some network access servers(NASs) during a user session,
This configuration step allows the NPS proxy to receive messages from the network access servers and to communicate with them throughout authentication.
If the type of network access server in connection request policy and network policy is set to Unspecified, NPS uses this policy to evaluate all connection requests that originate from any type of network access server.
with information that allows the network access server to communicate with NPS servers. .
When the client sends an EAP message to the network access server, the network access server encapsulates the EAP message as a RADIUS message and sends it to its configured NPS server. .
static routes properties are designed for a client that is dialing into a network access server(NAS), not for clients that are connecting to wireless access points.
the EAP messages sent between the remote access client and network access server are encapsulated