Examples of using Solid solution in English and their translations into Polish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Financial
-
Official/political
-
Programming
-
Computer
Solid solution state non-magnetic;
No magnetism in the solid solution state;
Solid solution speed and insulation.
T6 artificial aging state after solid solution treatment.
It has a solid solution composition and is not hardenable by heat treatment.
It is a single-phase alloy composed of a-phase solid solution.
Aluminum has a greater solid solution strengthening effect.
It is a single-phase alloy composed of a β-phase solid solution.
This treatment is applied to solid solution annealing and stress relief.
It is a single-phase alloy composed of alpha phase solid solution.
Three factors influencing solid solution of 304 stainless steel flange.
Titanium alloy is a single-phase alloy composed of phase solid solution.
We have a solid solution to address this issue to the delight of many readers.
Ratio, such as the guarantee of solid solution treatment, etc.
Typically allows are cooled rapidly so the chromium remains in alpha copper solid solution.
The strength of alloy 625 is primarily a solid solution effect from molybdenum and columbium.
Solid solution 225 USD/Ton cooperate with other factory for materials needMechanical properties.
Aluminum and tin act to stabilize a and solid solution strengthening.
Applying solid solution+ aging treatment in the two-phase region to obtain a two-state structure;
After the content, the strength is improved by the solid solution strengthening effect.
And through the solid solution- after the aging treatment, its mechanical properties are greatly improved.
Superalloys develop high temperature strength through solid solution strengthening.
OpenCart provides merchants with a solid solution for creating their own online businesses and stores at minimal costs.
Austenitic stainless steel generate single-phase austenitic organization after solid solution treatment, which is not stable.
Solid solution treatment(annealing) is heated to 1040-1150°C and rapidly cooled for maximum corrosion resistance.
When the temperature is up to more than 450℃, the carbon in the solid solution will gradually precipitate in the form of carbide.
In order toavoid intergranular corrosion, titanium-containing stainless steel must be stabilized after solid solution treatment.
A fast cool prevents the chromium from precipitating out of the solid solution, so the resulting cast structure consists of a single phase alpha copper structure.
Alloys have been traditionally made by heating andmelting components to make liquid forms which can be mixed together and cooled into a solid solution.
TZM alloy as Ti, Zr and C are formed in the alloy carbide precipitation and Ti,Zr solid solution, the recrystallization temperature of the alloy increased.