Examples of using Basic configuration in English and their translations into Portuguese
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Official/political
Basic configuration.
And all this in the basic configuration.
Iv. Basic configuration unit.
Configure Shortcuts& ndash; Basic Configuration.
Basic configuration of network and sharing.
Weight of drone basic configuration without battery.
Basic configuration〇optional configuration.
I said SIMPLE!They will have just a basic configuration.
Basic configuration of an artificial pond.
Ask if extensions to the basic configuration are possible.
Basic Configuration Version Multidiag pro+, support both USB connection.
The following quotas are available in the basic configuration.
Only the basic configuration of the network is required.
First, we will configure Rutera with the basic configuration.
Only the basic configuration of the network is required.
The following timeouts are available in the basic configuration.
The PDP-8's basic configuration had a main memory of 4,096 twelve-bit words.
For the money you get an ergonomic chair-saddle basic configuration.
This host is a necessary basic configuration for other modules.
Start the jail,connect to a console running on it, and perform some basic configuration.
Through Fieldbus communication or basic configuration through local adjustment.
For a basic configuration, you have to add/edit the following lines in/etc/dhcp/dhcpd. conf.
This chapter only explains the basic configuration and usage option of Pidgin.
Basic configuration micro-HOWTO gives some useful hints for optimal& kplayer; setup.
An ACPI table,supplying basic configuration information about the base system.
Basic configuration of LXPanel can be done with the GUI preference configuration dialog.
Certified Cisco DHCP and DNS. Basic configuration and firmware manager, network TCP/IP.
During the first start of& kmouth;,a wizard is displayed into which you can enter some basic configuration.
Some basic configuration parameters for the newly installed system are set during the procedure.
This is accomplished with the same basic configuration as shown above, with an additional compressor.