Examples of using Rectangular cross-section in English and their translations into Portuguese
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Official/political
Pipe frame(optimal square or rectangular cross-section);
A rectangular cross-section is specified with the dimensions of the deep beam.
The beam supported by two points is 6 m in length, rectangular cross-section of 20 x 40 cm, subject to a condensed force applied in the middle of the gap.
For the manufacture of load-bearing beams(kosoura or string) is recommended to use channels, I-beams fit,good material angled steel pipe with a rectangular cross-section.
The fuselage was of rectangular cross-section and featured a loading ramp at its rear.
The steel supporting structure is a kind of space frame with an upper andlower chord layer consisting of rectangular cross-sections as well as round pipe diagonals serving as connecting elements.
A special construction of the cable with rectangular cross-section of the jacket plus built-in FRP reinforcing rods naturally limit the bending capability in one plane to a safe bending radius range.
SC connectors are currently the most popular optical coupling elements due to simple matching(push-pull coupling with a snap) and rectangular cross-section allowing dense packing of the connectors on the panel.
The resistance of reinforced concrete beams of rectangular cross-section to the bending moment comes from the classical equations of equilibrium?N 0 and?M 0 and of the provisions recommended by the NBR 6118.
The objetive of this study was to evaluate the friction on the buccal aspect of six different types of self-ligating aesthetic( .022¿ slot) against aesthetic rhodium-plated niti orthodontic wire .019¿x .025¿rectangular cross-section.
A continuous beam consists of a rectangular cross-section of 20/35 cm and the concrete class C30/37.
The CTS series units are made in compliance with the relevant European directives and are available in 16 standard sizes, from 01 to 10 with square cross-section and11 to 16 with rectangular cross-section, covering a range of standard air flow-rates from 1000 up to 80000 m3/h.
The problem consists of a reinforced pull rod with 70 cm in length and rectangular cross-section 10 x 10 cm2, with a steel bar with moment of inertia I 490.87 mm located in the centroid of the section Figure 3.
The most relevant differences between the stems are as follows: stem A, Spoacr: 1º15 conical distal shape designed to give an auto-centralization with the medullar cavity; stem B Maximar: double-taper 4º30 and 1º respectively at the lateral and medial sides, showing in the frontal plane, 3º12 at the lateral plane, rectangular crosssection with rounded comers; stem C Spoac NGr: triple-taper 3º, 3º30, 3º53, respectively at the frontal, lateral andtransverse planes, rectangular cross-section with rounded comers.
Repulsion rectangular brake is fixed on upper drag link with rectangular cross-section, and it has unique design that makes it compact and light.
The specimens were composed of a rectangular cross-section B x D with a fixed width of 80 mm and an effective span S equal to four times the section height D. The notch at the mid-section of the span a 0 was maintained at 40% of the beam height.
Where n is the total number of layers,b is the width of the rectangular cross-section and yi is the coordinate for the i-th layer from the section centroid.
Repulsion rectangular brake is fixed on upper drag link with rectangular cross-section, and it has unique design that makes it compact and light.
This hypothesis naturally explains almost all observable properties of the rings: rectangular cross-section, decrease of thickness in the direction of Jupiter and brightening of the top and bottom edges of the rings.
The popularity of the indoor cable is the result of low price, high mechanical resistance, anda special construction with rectangular cross-section of the jacket plus built-in FRP reinforcing rods naturally limiting the bending capability in one plane to a safe bending radius range.
Linear units of the TV Series have a rigid anodized aluminum extrusion with square cross-section(rectangular in the case of TV 140), the transmission of motion is achieved by means of a precision C5 or C7 rolled ball screw drive.
PRECISION SYSTEM- TV Linear units of the TV Series have a rigid anodized aluminum extrusion with square cross-section(rectangular in the case of TV 140), the transmission of motion is achieved by means of a precision C5 or C7 rolled ball screw drive.