Examples of using Second input in English and their translations into Portuguese
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Official/political
A sensor can be connected to the second input.
SECOND IN: Second input for a CV signal.
The exact transformation is controlled using a second input- the secret key.
Second, input email information to DVR/NVR.
It is normalled to the second input of the section 1.
IN B: Second input for applying signal you wish to split.
The switch works by converting the Thru socket into a second input, providing you with two input channels on the box.
Second input can be configured as remote setpoint of single loop.
Or if you plug a patchcable into the second input, you automatically get two independent multiples.
The second input was the telemetry system for axial force measurement in the turbine, and the third input was rotational speed.
This amp also provides the option to switch to less than 1W via the second input, perfect for times when loud volumes aren't permitted.
With respect to the second input(voltage deviation), this is calculated using the equation shown in 1.
The Ashdown B-Social lives up to its name by allowing the bassist to play along with another bass player or guitarist,whether acoustic or electric, with the second input as well as the bluetooth connectivity.
There was a second input of comparable size, northwest(item 5 of the plan), but his header was gone.
Given X and Y, each with N/2 digits, we're going to represent X as terms of its first half of the digits A, and its second half of the digits, B. Similarly,we will write Y the second input, in terms of its first half and second half of digits, C and D.
IN2B: This is the second input of section 2 for applying logic level signals such as gates and triggers.
This built-in module can be directly integrated into the control device. One input of the module has a fixed Tamper signal,several set signals can be selected for the second input and the third input serves either to report a fault of the connected device, or it can be used as the second control conductor with a fixed“Unset” signal.
The second input is normalled to the first output, so if nothing is plugged in to the second input, you get one signal split to 5 outputs.
One input of the module has a fixed Tamper signal,several set signals can be selected for the second input and the third input serves either to report a fault of the connected device, or it can be used as the second control conductor with a fixed"Unset" signal.
The second input has a 180-degree flip to prevent phasing issues, whilst the single XLR output can be connected to a powered speaker, or a console/recording interface input with the summed signal. Product Ref.
In the context of attack, there are two types of preimage resistance: preimage resistance: for essentially all pre-specified outputs, it is computationally infeasible to find any input that hashes to that output, i.e., given y, it is difficult to find an x such that h(x) y. second-preimage resistance:it is computationally infeasible to find any second input which has the same output as that of a specified input, i.e., given x, it is difficult to find a second preimage x′≠ x such that h(x) hx′.
A tweakable block cipher accepts a second input called the tweak along with its usual plaintext or ciphertext input. .
One input of the module has a fixed Tamper signal, the second input reports an alarm signal and the third input is used to report a fault of a connected device or to report a special"Masking" signal for detectors with an Anti-masking function.
One input of the module has a fixed tamper signal, the second input reports an alarm signal and the third input is used to report an error of a connected device or a special"Masking" signal for detectors with an anti-masking function.
Usually, the round function R takes different round keys Ki as second input, which are derived from the original key: M i R K i( M i- 1){\displaystyle M_{ i}= R_{ K_{ i}}( M_{ i-1})} where M 0{\displaystyle M_{0}} is the plaintext and M r{\displaystyle M_{r}} the ciphertext, with r being the number of rounds.
On power level 1, the number of seconds input equals the number of seconds experienced within the microwave.
If you specify a value of less than 60 seconds(1 minute),the time input will show a seconds input area alongside the hours and minutes.