Examples of using Surface will in English and their translations into Romanian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
Surface will always be keep dry.
Otherwise, the surface will be uneven.
Surface will always be keep dry.
Any signal from the surface will be accelerated.
The surface will be hot, so be careful.
From a sponge the surface will become rough.
Once they enter the cave system,all communications with the surface will be lost.
If it is already ripe, the surface will have a bright dark green color.
With its help water is distributed evenly over the hill and the surface will be smoother.
Any unevenness left on the surface will ruin the whole look of the room afterwards.
When using this protective paint, the surface will be matte.
The surface will differ in saturation, so it is recommended to use it in accents.
If the agent is applied in one layer, the surface will remain matte.
The surface will turn out smooth, beautiful, with the absence of air bubbles, delamination and other troubles.
Beautiful mirrors andmirror cleanliness of the surface will complete the image!
Priming the surface will provide maximum adhesion between the rough surface and fill solution.
About what materials exist, andhow they cover the surface will be described in this article.
But no one on the surface will, unless they have x-ray vision, will see your sediment.
The smoother fitted and aligned with the floor,the beautiful and practical surface will look like in the end.
This means that the surface will be easy to clean and bacteria will not be harbored in the stone.
As for the walls, then the material is better to paste,so the surface will be more durable.
As a result, not every Surface will receive the update at the same time, but the update will be delivered to all devices.
The surface is hard enough that if somebody cut right on the surface, the surface will be unaffected.
The surface will be perfectly flat, besides the material allows you to make a multi-level design, thus allocating certain areas.
The sun is heading into a periodknown as solar minimum, during which activity at the surface will‘change form.'.
Only the requirements for leveling the surface will be significantly lower, since dense bamboo material hides minor flaws in the walls.
There are linen untreated with lacquer andif frequently wiped with a damp sponge or cloth, the surface will become unusable.
If the surface will be trimmed with decorative panels or upholstered with plasterboard it can be fastened directly to the slab with dowels with a wide bonnet.
If the foam is to be mounted on a metal door had time to harden,then clear it from the surface will be more difficult.
TC4 titanium alloy in hot forming process, the surface will form a layer of oxide, hot forming temperature is different, the oxidation of skin color is not the same.