Examples of using Surface will in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
So the surface will have little gold color.
After roll formed by this roll forming machine, the surface will be very smooth without any scratch.
The base surface will have to uniform and hard.
If the partition is set near a bathtub or shower,then the surface will inevitably be water and soap stains.
The surface will be able to easily clean and sterilize.
Wait until the start reaction(the surface will bubble) and the adhesive softens.
Carved surface will swallow some light in our modular flooring.
Otherwise the plaster on such a surface will fall ill and will not last long.
Surface will become anti-oil pollution & less water mark.
After rubbing, the surface will have two tone effect.
PVDF(surface will be much more smooth, level off and glossy, it also has a much longer life span than common treatment).
If it is already ripe, the surface will have a bright dark green color.
The surface will be created directly based on the labels and profiles.
Ink consumption is calculated on the basis that 1 m² surface will take up to 0.5 liters of solution coloring.
Most of the industrial metal is a multicomponent alloy, microstructure, impurities, machining deformation is not uniform, uniform stress distribution, uniformity of these physical, chemical and electrochemical corrosion,when encountered surface or water film formed on the surface, will inevitably occur in chemistry or electrochemical corrosion.
This composition hardened surface will be protected from the appearance of mold.
You may need to exhibiting beacons of plasterboard orplaster mixture, if the surface will show a small bias in one direction or another.
The Earth's surface will be scorched the seas will evaporate.
This is done to ensure that the metal is stabilized in its size and hardened,otherwise during the operation of the product on the surface will appear mounds due to the fact that the spring block is strongly deformed.
Because a bright surface will perfectly display the final luminous effect.
Treated this way the bath surface will remain snow-white throughout the week.
Afterwards, the tread surface will be phosphated to improve surface conditions.
Disadvantage- put on a spot to remove the surface will be much more difficult, and likely have to resort to embellishing.
And if there is not enough pressure on the surface will form a large grain or paint will not go into a spray bottle.
Once the water within catches on, its surface will form a parabolic shape- you know, centrifugal force, gravity, surface tension and all that.
Excess grout is best to remove immediately after work-a week to clean the surface will not be easy, and the more pronounced the texture of tiles, the more effort will have to apply for it.
The presence of the electronicthermostat allows you to achieve significant savings- on the surface will always be a set temperature controlled thermal sensor and the control unit will carry out on and off the heating as needed.
Corrosion resistance is strong,even in highly corrosive atmospheric environment, the surface will form a strong, non-toxic zinc coating, commonly known as copper green, can automatically repair damaged protective layer, barely visible traces.
Industrial rust remover chemicals can repair the slight score on the marble surface, after using, the surface will creat crystal protection layer to avoid fouling, skidding, high temperature damage and acid/alkali, as well ae good for the stone maintenance.