Examples of using Temperature correction in English and their translations into Romanian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
Automatic temperature correction.
Temperature correction for insulation resistance.
Automatic temperature correction.
Temperature correction is possible for 9 types of samples.
To fix this, color temperature correction is needed.
Temperature correction: automatic correction, programmable correction. .
In measuring software,we can tune the influence of temperature by linear correction and temperature correction.
The temperature correction coefficient is 1.
It means that under specified conditions of temperature measuring doesn't need temperature correction, otherwise to be revised.
There will be no temperature correction for Class C3 tyres.
Reduce the impact of temperature changes on the accuracy(in addition to selected military-grade devices,in the design of a special temperature correction circuit).
The fixture includes single pixel control, color temperature correction and macros calibrated to the LEE filters standard for additional effects and flexibility.
If the device is still operating at 25 °C then the test is made with the device operating normally andthe exponent of the temperature term in the correction factor shall be taken as zero(no temperature correction).
Cold bath temperature control system uses digital thermostat temperature bath temperature control, the use of digital temperature controller can visually display the set temperature and the actual temperature, easy to set the temperature and temperature correction.
In addition to rich RGB colours andmacros calibrated to the LEE filters standard the PixBar 650C PRO provides colour temperature correction, 4 selectable dimming curves and single pixel control for impressive chase effects.
In addition to all that you have just read, there are plenty of other aspects,such as, ambient temperature correction coefficient, the coefficient for jointly laid devices, and so on, which must be considered when calculating the electrical wiring.
If the measured test surface temperature does not change by more than 5 oC within all measurements necessary for the determination of the sound level of one set of tyres, the temperature correction may be made only on the final reported tyre-road sound level as indicated above, utilising the arithmetic mean value of the measured temperatures. .
For higher temperatures correction ratio are used.
Some pH meters provide built-in temperature coefficient correction, with temperature thermocouples in the electrode probes.
Therefore, the main effect of thermal correction is temperature and time, and temperature is the determining factor.
The digital temperature control table can be used to visually display the set temperature and the actual temperature, making it easy to perform temperature setting and temperature difference correction.
The digital temperature control table can be used to visually display the set temperature and the actual temperature, andit is easy to perform temperature setting and temperature difference correction.