Examples of using Cooling method in English and their translations into Russian
{-}
-
Official
-
Colloquial
Internal cooling method.
Cooling Method Multi-speed fan.
Instead of reheating, the researchers applied a cooling method.
Cooling Method Variable-speed fan.
This is also considered an effective traditional cooling method in our latitudes.
Cooling Method: Air Cooled. .
This is a relatively efficient cooling method which requires no additional energy input.
Cooling method: Water-cooling.
At this point, the traditional data centre cooling methods are worthy of mentioning.
Cooling method: Air-cooling.
Returning to the air-to-air free cooling method, it is also important to know what buildings it can be used for.
Cooling Method Built-in cooling fan.
K coefficient shall be measured in continuous operation either by the internal cooling method or by the internal heating method. .
Cooling method: air cooling. .
When evaporated into the air using the cooling equipment, water cools the air of the particular room, hence the name- the adiabatic cooling method.
Cooling Method Water Cooled. .
Insulating capacity shall be measured in continuous operation either by the internal cooling method or by the internal heating method. .
Cooling Method: Direct Cooling. .
Insulating capacity[K coefficient] shall be measured in continuous operation either by the internal cooling method or by the internal heating method. .
With intensive cooling method they are reduced to 0,5-0,8.
The new system ensures that the temperature in the data centre is kept stable between 23C and 25C andoffers annual savings of 30 per cent when compared with conventional cooling methods.
Cooling method: Air-cooling/Water cooling. .
Strong heat dissipation capacity: use bottom blowing cooling method of centrifugal turbine blower, copper board radiator structure, and cooling efficiency is higher;
Cooling method: closed water-cooled or air-cooled.
As for the existing buildings, it is complicated, at times even impossible to install the equipment, because it is large andrequires large air openings, therefore it is quite difficult to adapt the building to be reconstructed to suit this data hall cooling method.
Cooling Method UPS cooling via rear-exit fan.
The countercurrent cooling method avoids direct blowing of cool air on the hot pellets.
Cooling method: jacket cooling, interior and exterior limpet coil cooling. .
Old 10. Where the internal cooling method is[used], one or more heat exchangers shall be placed inside the body.
According to him, this cooling method cannot completely replace the traditional one, because it works only when the outdoor temperature is not higher than 22 degrees Celsius above zero.