Examples of using Duplex stainless in English and their translations into Russian
{-}
-
Official
-
Colloquial
Duplex Stainless Steels.
The cutting methods of duplex stainless steel.
Duplex stainless steel.
The cutting methods of duplex stainless steel.
Duplex Stainless Steels.
Titanium-stabilized duplex stainless steel.
Duplex Stainless Steels.
Previous: The cutting methods of duplex stainless steel.
Super Duplex Stainless steel.
RE60(00Cr18Ni8Mo3Si2) is austenitic-ferritic duplex stainless steel.
Duplex Stainless Steel Piping.
The casing of the Boerger pump is made of duplex stainless steel.
Duplex Stainless Steel Filter.
Typical matrix materials include stainless steel, duplex stainless steel and super alloys.
We are one of the best duplex stainless steels manufacturers, suppliers, exporters and sellers in China.
Special corrosion resistant steels-- limited to steels resistant to Inhibited Red Fuming Nitric Acid(IRFNA)or nitric acid, such as nitrogen stabilized duplex stainless steel N-DSS.
In the temperature range of -50 degrees to 280 degrees, duplex stainless steel has good mechanical properties.
Duplex stainless steel is a nitrogen-added duplex stainless steel(referred to as 2205 duplex steel).
The Börger rotary lobe pump is made of Duplex stainless steel and equipped with a maintenance-free mechanical seal.
Duplex stainless steels have a mixed characteristic of austenite and ferrite, the aim being to produce a 50/50 mix, although in commercial alloys.
Please rest assured to buy orwholesale high-quality duplex stainless steels made in China here from our factory.
Titanium-stabilized duplex stainless steel(Ti-DSS) usable in the systems specified in 1.A. or 19.A.1. and having all of the following.
High strength, fast work hardening andtear resistance make duplex stainless steel relatively difficult to punch and wear the tool.
Duplex stainless steel 2205 alloy is a duplex stainless steel composed of 21% chromium, 2.5% molybdenum and 4.5% nickel-nitrogen alloy.
However, due to the high shear strength of duplex stainless steel, it is necessary to increase the shear force or reduce the shear thickness.
Duplex stainless steels are typically processed using the same plasma cutting and laser cutting equipment as austenitic stainless steel.
Maintaining a good longitudinal edge quality of a duplex stainless steel coil requires the use of tool steel or carbide inserts.
The duplex stainless steel is cut to the same equipment as the 304 and 316 stainless steels, and generally requires no special adjustment.
MENA-Water supplied andinstalled 6 Perforated Belt Filter Screens made of duplex stainless steel to improve the treatment and replace existing Step Screens.
When higher strength duplex stainless steel is used, the section size and weight can be reduced, further reducing the initial cost.