Examples of using Mechanical stability in English and their translations into Russian
{-}
-
Official
-
Colloquial
Very good mechanical stability.
This standard demands, for example,high mechanical stability.
Drawbacks- rather low mechanical stability and firmness of color.
The cage and core of polypropylene ensures maximum mechanical stability.
However, mechanical stability of this coating is also lower, than that of Pural.
Frequent autoclaving reduces mechanical stability.
Mechanical stability of operating mechanism is high,mechanical life was designed as 10000 times;
Metal pins in the stack pro- vide mechanical stability.
Polyester provides greater mechanical stability than ABS or PC, but it is lighter than aluminium.
An optimal condition for implant osseointegration is its mechanical stability.
In order to achieve good mechanical stability, pin-in-hole reflow is used to solder the Plug to the PCB.
The temperature monitoring of rolling stock sets high demands on the sensors with respect to mechanical stability.
An optimal condition for osseointegration is a mechanical stability of an implant in the bone 1, 2.
For bonding achieves high optical quality for use in difficult lighting conditions,as well as high mechanical stability.
This product has excellent water resistant property, mechanical stability and lubricating performance.
High mechanical stability and minimal wear ensure high operational reliability with minimal maintenance expenditure.
Construction and Off-Highway Grease also has exceptional mechanical stability even in the presence of water.
Mechanical stability is lower than that of Pural, thus the material with such coating demands careful treatment during transportation and installation.
In addition, the plane-scanners have high mechanical stability compared to the brittle piezoelectric-tubes.
The protective jacket acts as protection in accordance with VDE 0100 and increases the mechanical stability of the band heater.
The optional foot elements increase mechanical stability in the case of longer profiles and/or high loads.
Studies have also shown that alginate-PLL-alginate(APA)microcapsules demonstrate low mechanical stability and short term durability.
They feature sufficient rigidity and mechanical stability, high temperature and high electrical resistance and low heat conductivity.
These melting crucibles are especially suitable for precious metal melting and feature a high degree of thermal,chemical and mechanical stability here.
The optional foot elements increase the level of mechanical stability for long profiles or high loads.
Uncontrolled cooling may result in the"freezing in" of thermal stress which would considerably reduce resistance to breakage and mechanical stability.
L" type long pitch rotor;very low rotation speeds; mechanical stability with insignificant vibrations;
Polypropylene support fleeces protect the membrane and provides wide chemical compatibility, while the polypropylene cage andcore help to ensure maximum mechanical stability.
Specialized production technologies give these components high mechanical stability while protecting the rail material at the same time.
The cage, core and end caps are made from polypropylene and are thermally bonded to each other, thus achieving very high chemical,thermal and mechanical stability.