Examples of using Selector switch in English and their translations into Russian
{-}
-
Official
-
Colloquial
Incl. armrests left with a selector switch.
Ss2 selector switch wireless adress set.
Set the type of engine using the selector switch.
Set the mode selector switch 6 to or.
Set the appropriate range using the selector switch.
For drilling, push selector switch 3 leftward to the stop.
Set the torque selector switch to the desired torque.
DC Standard Duty(Q300) for illuminated push-buttons and illuminated selector switch Direct current cat.
The selector switch of the right side is installed later.
THRU,,(crossfader curve selector switch)[THRU] position.
Mode selector switch in OFF or incorrect position.
Turn the AUX/RADIO function selector switch(8) to the.
Use POWER selector switch to select power level.
Release the safety lock and check that the mode selector switch is locked in place.
Set the selector switch 4 to the“Impact Drilling” symbol.
In order to turn the radio off, push the function selector switch(1) to the OFF/AL position.
Is the input selector switch set to the proper position?
This operation is not necessary when the[CROSS F. CURVE] selector switch is set to THRU.
For 2 position selector switch and selector push-button.
Move the speed selector switch(Fig.10) 1.
The function selector switch on the IQnomic plus module must be set to position 7.
Turn the power level selector switch(3) to„0“ and ensure.
The torque selector switch can be used to select three torque settings.
Turn the function selector switch(21) to the“CD/AUX”.
Move the Channel Selector Switch to 1, 2, 3, or 4 to select a channel.
The module's function selector switch must be set to Position 6.
Check if the Channel selector switch is set to the same Group.
Check if the frequency selector switch is set to the same channel.
With another push of the selector switch the device moves to the highest speed.