Examples of using Test device in English and their translations into Russian
{-}
-
Official
-
Colloquial
Test Device and Set-Up.
Acceleration test device.
Test Device and Set-Up.
Deceleration test device.
Test device and conditions.
The Demo key allows you to configure a test device.
Test device for clearance to ground.
I experienced about 6 per cent extra consumption on the test device.
The test device shall be as shown in Figure 5.
What is Warranty of Megger Insulation Resistance Tester/test device?
Test device to verify protection against water jets hose nozzle.
What is voltage of Megger Insulation Resistance Tester/test device?
The test device and procedure will be further developed and validated.
What is the accessories of Megger Insulation Resistance Tester/test device?
The test device shall remain in contact with the vehicle see Figure 6.
Frequency conversion hv test device cable ac resonance test systems.
Operating steps of insulation gloves withstand voltage test device[Dec 04, 2019].
Stand part of the test device using the whole structure, made of 304 plate material processing.
Previous: Operating steps of insulation gloves withstand voltage test device.
As of right now, the firmware of the test device is riddled with bugs,but only the test device.
DC hipot measures the insulation resistance of cables by applying a high voltage on the test device.
The test device for clearance to the ground in Annex 3 is simplified and only one dimension(300mm) will be applied.
Insulation boots(gloves) withstand voltage test device use precautions.
He explained that this proposal would set out a methodology for indexing information files for each and any particular test device.
Hot Tags: 600kv electric lifting insulation rod withstand voltage dielectric test device, made in China, manufacturers, discount, cheap.
The test device is composed of four parts, a power frequency voltage generator, a voltage measuring meter, a pressure electrode, a receiving electrode and the like.
Each connection line cannot be connected incorrectly,otherwise the test device may be damaged.
The test device is used for the overall power frequency withstand voltage test of insulation tools such as insulation rods and electroscopes of 1000 kV and below.
The Concept Tech GmbH presented information on the influence of friction in the test device used for inverse testing.
Interest was also expressed in developing a test device that could be used to test high bumpers to assess their potential for knee, thigh, hip, and pelvis injuries.