Examples of using Test voltage in English and their translations into Russian
{-}
-
Official
-
Colloquial
First, the test voltage.
Test Voltage Around 5.0V.
Can not be boosted to the test voltage.
The test voltage is below 50kV.
Can not be boosted to the test voltage.
People also translate
Proof test voltage(kV).
The tests shall be made at test voltage.
Test Voltage between terminals.
It is characterized by nothing to do with the test voltage.
The test voltage is relatively low.
The time of application of the test voltage shall be 1 min.
Test voltage for signalling devices.
The time of application of the test voltage is fixed at 1 min.
Test voltage between terminals and case.
This interference is generally independent of the test voltage level.
Test voltage(Spark test). .
Measurements have to be carried out at relevant test voltage.
Test voltage(Spark test). .
Reference luminous flux in lm at test voltage of 13.5V DC 6/.
Test voltage(electric field strength).
Power consumption measurements shall be carried out at relevant test voltage.
Watts at test voltage of 13.5 V DC.
Ammeters M1620 andvoltmeters M1620 stand following the insulation test voltage.
Test voltage and test time setting.
Under normal circumstances, voltage protection values are set higher than the test voltage 4KV.
Test voltage peaking values is calculated below.
With constant test current,constant test voltage or constant source impedance model.
The test voltage is applied for the set duration.
Software control, makes it possible to switch the test voltage on/off either from the voltage source and/or from the MSVT.
The test voltage and leakage current are displayed at the same time.