Examples of using Flammability in English and their translations into Serbian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Latin
-
Cyrillic
The flammability is what worried me.
Safety of toys- Part 2: Flammability.
Flammability characteristics of interior materials for bus/.
PVC ceilings perfectly resist flammability.
Upper/ lower flammability or explosive limits: No data.
PrEN 71-2- Safety of toys- Part 2: Flammability.
Flammability It is preferable to use non-combustible types of materials.
Combustability… plus electricity… equals flammability.
Have a high threshold for flammability. Practicality. Finishing materials.
From above it must be coated with clay to reduce flammability.
Due to the flammability of sawdust and gasoline in the tool, the use of open fire and smoking are prohibited.
These include a sharp toxic smell of the substance and its flammability.
The second significant disadvantage is the flammability of the material itself, which will cause great damage in case of fire.
Students gain knowledge on ignition and flammability limits.
IntroductionThis test standard describes the method to assess the flammability of products emerging from aerosol dispensers due to their propensity to ignite in an enclosed or confined space.
Investigation of basic polymer properties- density,solubility, flammability 5.
This test standard describes the method to determine the flammability of an aerosol spray emitted in the form of a foam, mousse, gel or paste.
The person responsible for the marketing of the aerosol dispenser has to describe the method used for determining the chemical heat of combustion in a document to be made readily available in an official Community language at the address specified on the label in accordance with point(a) of Article 8(1),if the chemical heat of combustion is used as a parameter for assessing the flammability of aerosols according to the provisions of this Directive.
Depending on gas composition, pressure andexplosive limits(flammability), the lowest ignition temperature of natural gas ranges between 595 and 645°C.
Using the known values for the maximum allowable concentrations of these substances in the environment and the animals to the Act and legislation on this matter is set for model making MSDS list of individual pollutants and provide methods of use, transportation, processing and disposal of these materials.The outcomeIn particular, the study of their ecotoxicological properties(reactivity, flammability, explosiveness and toxicity).
Many of the films from this era are now lost thanks to the instability and flammability of the nitrate film they were printed on, affecting even some of the largest stars of the era.
In particular, the study of their ecotoxicological properties(reactivity, flammability, explosiveness and toxicity).
Hydrofluoroether boiling point detergent for Precision parts Hydrofluoroether detergent Non flammability There is no ignition point and it does not belong to the dangerous substance stipulated by the Fire Law and it is an environment friendly….
Difluoromethane serves to provide the heat capacity,pentafluoroethane decreases flammability, tetrafluoroethane reduces pressure.
HFE cleaning solution for Components andparts Hydrofluoroether detergent is kind of non flammability liquid There is no ignition point and it does not belong to the dangerous substance stipulated by the Fire Law it is an environment friendly….
Aerosols containing more than 1% flammable components or with a heat of combustion ofat least 20 kJ/g, which are not submitted to the flammability classification procedures in this section shall be classified as aerosols, Category 1.
Based on the physical, physico-chemical andtoxicological characteristics are determined by hazard class(class reactivity, flammability class, class explosion and toxicity class), their impact on wildlife(systemic, acute and chromic effect), determine their toxicity according LD.
Aerosols containing more than 1% flammable components or with a heat of combustion ofat least 20 kJ/g, which are not submitted to the flammability classification procedures in this section shall be classified as aerosols, Category 1.
Manufacturers shall, before placing a toy on the market, carry out an analysis of the chemical, physical, mechanical,electrical, flammability, hygiene and radioactivity hazards that the toy may present, as well as an assessment of the potential exposure to such hazards.
According to the European Toy Safety Directive 2009/48/EC, before placing a product on the market, toy manufacturers shall carry out an analysis of the chemical, physical, mechanical,electrical, flammability, hygiene and radioactive hazards that the toy may present, as well as an assessment of the potential exposure to such hazards.