Examples of using P-type in English and their translations into Serbian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Latin
-
Cyrillic
This is the case in a p-type semiconductor.
The P-type ATPase is transiently phosphorylated during transport.
The circuit is constructed on a P-type substrate.
CMOS circuits are constructed in such a way that all P-type metal-oxide-semiconductor(PMOS) transistors must have either an input from the voltage source or from another PMOS transistor.
The collector is very similar to the emitter andis also a P-type material of the PN junction.
With the base made of P-type material and the collector of N-type material, this direction of electron flow is clearly backwards to the direction normally associated with a PN junction!
So we have on one side an n-type semiconductor andon the other side a p-type semiconductor.
An N-type semiconductor and a P-type semiconductor that are placed together.
After heating, indium diffuses into the adjacent areas of the semiconductor,turning them into p-type semiconductors.
Symbol TE, atomic number 52, silvery white,brittle, P-type semi-conductor believed to be the source of odour and garlic.
The polysilicon, diffusion, and n-well are referred to as"base layers" andare actually inserted into trenches of the P-type substrate.
This part makes sense since the current is flowing from the P-type base to the N-type emitter: the junction is obviously forward-biased.
That's because, without an electric field, the cell wouldn't work;the field forms when the N-type and P-type silicon come into contact.
Acceptor- converting the same material into a p-type semiconductor, having an artificially created lack of free electrons.
The JFET is a long channel of semiconductor material,doped to contain an abundance of positive charge carriers or holes(p-type), or of negative carriers or electrons(n-type).
The researchers tested the mixture by applying alternate p-type(positive) and n-type(negative) layers of the paint on a metal dome, which generated an average power output of 4 mW per square centimeter.
The mobile carriers in electric currents are usually electrons, but sometimes they are charged positively, such as the positiveions in an electrolyte, the H+ ions in proton conductors or holes in p-type semiconductors and some(very rare) conductors.
When the electrons from the n-type side“fill the holes” in the p-type side, they then lose energy in the form of these light photons.
To test the resultant mixture, the researchers applied alternate p-type(positive) and n-type(negative) layers of the thermoelectric semiconductor paint on a metal dome, generating an average power output of 4 mW per square centimeter.
Considering again an n-channel enhancement-mode device,a depletion region exists in the p-type body, surrounding the conductive channel and drain and source regions.
We successfully developed hight purity Tellurium Dioxide 99.999%, P-type Bismuth Oxide, low melting point alloy as well as low-oxygen metal nanopowder.
If either of the A or B inputs is low, one of the n-typetransistors will not conduct, one of the p-type transistors will, and a conductive path will be established between the output and Vdd, bringing the output high.
