Examples of using Cross section in English and their translations into Slovak
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
Proposed- cross section.
Length up to 9 500 mm(depending the cross section).
Bolts(M 10) or steel rods with a cross section of 10 mm and a length of 12 to 15 cm;
Tools made from natural material do not contribute to the cross section.
If we talk about the cross section of the chimneys, it can be either rectangular or oval.
The dartboard itself may have its origins in the cross section of a tree.
Shortened fuselage: same cross section, providing capacity of about 200 passengers.
Free A counting app to estimate the number of rings on a cross section of a tree.
In the first case, its cross section should be 35-40 mm; in the second, 25 mm will suffice.
Represents the growth of a tree in a single year, visible in cross section as annual rings.
Counting the wire cross section- do not forget about the safety factor, it should be at least 30%.
So study the structure of cableproducts, just from observation and analysis ofits cross section.
Flawlessly ground ceramic blade in cross section should be somewhat convex on the sides.
Drilled in the form of a screw of the manualtype is used for the manufacture of grooves, their cross section is 5 mm.
The larva has a thick, round body in cross section, on which several segments can be clearly seen.
Now scientists have developed a nanoparticle-chemical structures that are 1000 times smaller than the cross section of a human hair.
A self-supporting cable is used, the cross section of which depends on the power consumption and the number of phases.
On foundation blocks,you will need to install racks of walls, the cross section of which is also 90x90 mm.
That is, a square blank in the cross section was cut down, each side of which is twice as thick as the future column.
A view can include lighting, camera position, rendering mode,the Model Tree state, and transparency and cross section settings.
I am going to make a model of my house with a cross section between the roof and the house so everything is visible.
Combustion products of solid fuel must be removed through the chimney,which is installed vertically without reducing the cross section.
Most often, drills are used for perforator operation, the cross section of which has limits from 4 to 80 mm.
The parish church, which in the cross section of history served both Catholics and Lutherans, is fortified with 93 steps of travertine leading up to it.
Girder is welded with Q345Dgrade steel plate with 16mm thickness, so that its cross section is formed as a box, turning outside into tuyere.
When closing the valves, the flow rate cross section is reduced and in this way the difference of pressure upstream and downstream valves is also increased.
In the latter case,you will need a board with a thickness of fifteen to twenty mm and a wooden beam, the cross section of which is from sixty to seventy mm.
His paintings with insectlarvae placed in a ragged ground plan or cross section of a medieval church were exhibited as a contemporary counterpoint nearby Gothic painting paintings.
For the primary winding of the transformer, which is formed independently, the primary winding willconsist of 100 turns of the PEV wire with a cross section of 0.3 mm.
N41 Neodymium-doped phosphateglass has high stimulated emission cross section, low nonlinear refractive index and good thermal characteristics is specially for high power laser facilities.