Examples of using Drying process in English and their translations into Slovak
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
Will the house be habitable during the drying process?
Following the drying process, the chosen flooring is laid.
Platon Stop supports the natural drying process.
After the drying process a stable product called raw tea is produced.
Specially for the stringent requirements in the drying process.
Freeze drying process display segments, user can skip.
Thickness to prevent cracks or bubbles in the drying process.
Before the drying process is completed, it is spread with a grater.
Save your cost buthelp you achieve same perfect freeze drying process.
And tumbler drying process, depending on your textile.
Specially for the stringent requirements in the drying process Pressure cylinders.
In the drying process, shake each one so that the fluff does not stick together.
By removing materials which are damaged by water, we can speed the drying process up.
The resulting products undergo a drying process, which can last about 14 days;
This is necessary to compensate for the deformation of the material during the drying process.
Speed up the drying process with a small space heater or, better yet, a portable radiator in the room.
The first andmain difficulty is the cracking of the finished solution during the drying process.
And in order to speed up the drying process, you can use a regular hair dryer and set the average air flow temperature.
Solvents are importantcomponents of liquid coatings that are volatile during the drying process.
Normal drying process: Drying in the tumbler is possible under normal load and temperature(80°C) without limitations.
The rapid movement of hot air drives wet materials suspended in hot air,so as to improve drying process and transmitting efficiency.
To shorten the drying process, the owner also decided to use another dehumidifier- Master DH 25- in another room.
Compared with organic varnishes,oil varnishes are less weather resistant and the drying process is associated with the moisture content of the wood.
So during freeze drying process we need to avoid the food temperature reach eutectic point, or food will appear ice crystal melt.
Product Details The series of Q69 steel sheet shot blasting pre-treament line are mainly consist of warm-up,shot blasting and spray painting and drying process.
(d) Automatic Drying process After raw materials are crushed a dryer is needed since most raw wood materials havea moisture content of about 50%.
Smart sensor technology automatically controls the drying process according to the selected programme, laundry type and desired level of dryness.
This includes a drying process that evaporates the water content of the fruits without harming or reducing the nutritive value of the dried apricots.
SensorIQ intelligent technology automatically adjusts the drying process according to the selected programme, type of laundry, and desired level of dryness.
After the drying process, there is no need for smashing and sorting, so as to reduce the operation procedures in the production and to enhance the product purity.