Examples of using Lead wire in English and their translations into Slovak
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
Disconnect lead wires.
Ecg Lead Wire Manufacturers.
Never lead wire over the stove!
Terminal: With Lead Wires.
Output lead wire interface 5.
Weight while you put the lead wire in order.
Small components have bare lead wires for soldering.
Lead wire iron seal coil.
Supplied with 3 pin transformer. 10m lead wire.
Lead wire 2 electrode gas discharge tube 5.5*4mm.
No damaging the surface of lead wire while barking its end.
Special lead wire construction prevents open circuit failures.
Unlike the classical constructions made of lead wire and pieces of colored.
Make sure that all lead wires fall into the grooves in the handle of the gun.
With the integrity of all contact and starting elements,as well as the reliability of soldering and lead wires, the motor itself is tested.
Lead wire should be connected correctly according to grade that connecting diagram offers.
No damage to the surface of lead wire while equipment rotating, all lead wire can not.
These pickups are crafted with same process as the ProBucker and P-90 PRO, and feature 18% nickel silver covers with German manufactured Elektrisola Magnet wire, Alnico IV sand cast magnets, and braided coaxial lead wire.
Unlike the classical constructions made of lead wire and pieces of colored glass, the film weighs a little, does not create loads and can be glued to almost any surface.
It can detect whether the contact of each position of the voltage tap changer is good and whether the actual position of thetap changer matches the indicated position, whether the lead wire is broken or not, and the multi-strand wire is wound.
Set of 8 Decorative Patio lights,clear ST40 café bulbs on brown low lead wire, 3.25″W x5″ H deluxe light covers,lead cord: 12″, bulb spacing: 17″, tail cord: 12″, 10′ lighted length, connected up 7 sets together- Metal wire cage Café Light Covers. UL/NOM listed.
The significance of measuring the DC resistance is to investigate the winding insulation and current loop connection conditions, and can reflect the winding quality of the winding, the winding turn-to-turn short circuit,the winding strand break or the lead wire break, and the tap Faults such as poor switch and wire contact, in fact, it is also an effective means to judge whether the DC resistance of each phase winding is balanced and whether the voltage regulation switch is correct.
It can reflect the welding quality of the winding, the winding turn-to-turn short circuit,the winding break or the lead wire break, the tap changer and Faults such as poor wire contact, in fact, it is also an effective means to judge whether the DC resistance of each phase winding is balanced and whether the voltage regulating switch gear position is correct.
You can solder directly the LED wire and resistance as you will see in the following diagram, Although it is much better to use a Breadboard;
About Us We are the leading Wire Stripping Machines manufacturer and exporter in China.
On the other hand, too short wire lead to inconvenience in use.