Examples of using Reverse switch in English and their translations into Slovak
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
Reverse switch on the stator winding poz.59.
The next step is to take out the reverse switch.
Degree polarity reverse switch aids time alignment.
Mini Innofader line faders with reverse switches.
Reverse switch for repairs necessary to disconnect the rear cover.
Hi/low pass filter slider on each channel with reverse switch.
Individual Phase reverse switches for instant phase correction.
Disclaimer inclusion punchcan be caused by abrasion of the contacts on the reverse switch.
Violation of the reverse switch is due to the burning of his contacts.
Consistently set the on punch button Bosch,contacts and charge poz.19 pos.16 reverse switch.
Once in reverse playback, pressing the reverse switch will make playback go forward at the beginning of the next loop cycle.
Another, frequent electrical fault,bad contact between the stator and lower reverse switch contacts.
The direct boxoutput features a 180 degree polarity reverse switch that aids phase-alignment between the monitors and stage amp.
Failure of punch for the electrical part is accompanied by a burning smell, strong heating tool during operation, the emergence of large sparks in the vicinity of therotor collector punch bad tripping reverse switch.
The DIF-2S also features a reverse switch, allowing versatility when it comes to your scratching style and is also compatible with the original innoFADER for future upgrades.
The module also features built-in Phantom Power for connectingcondenser microphones as well as Phase Reverse switch which is perfect for recording multiple takes.
The Sub15 also incorporates a 85Hz high pass filter switch and phase reverse switch to provide maximum integration into a range of set ups as the high pass filter optimises the satellite speaker output to meet the Dolby® theatre sound requirements.
The innovative 8kHz high-cut filter on each of the four channels is designed for guitar applications,while the Phase Reverse switch provides optimal signal alignment.
This is augmented with a ground lift switch and180º polarity reverse switch that ensures both amplifiers play in phase while noise is reduced to an absolute minimum even when using older vintage amps that are generally more prone to noise.
Each channel features trim control, 3-band EQ, pan slider, fader reverse and curve adjustment,high/low pass filter slider with reverse switch, DVS send/returns and direct outputs.
The Sub15 also incorporates a 85Hz high pass filter switch andphase reverse switch to provide maximum integration into a range of set ups as the high pass filter optimises the satellite speaker output to meet the Dolby® theatre sound requirements.
Additionally, the selector features a ground lift switch to eliminate hum and buzz generated from ground loops,plus a 180 degree polarity reverse switch to help time-align the PA with the stage amplifier.
The Switchbone ABY's photocells ensure perfect noise free switching, even between high gain amplifiers, its second output is 100 isolated to eliminate all signs of hum and buzz, and you will always be able to keep both amps in phase bytoggling the easy access 180° polarity reverse switch.
The control panel is featured with input gain, 3-band semi-parametric EQ with variablemid-frequency, a three position low frequency filter and 180 DEGREE polarity reverse switches, to help eliminate acoustic hot spots that can cause audio feedback.
The cabinet features combi-jack inputs, thermal and overload/clip protection, LFE input gain, XLR outputs, a special subwoofer/line bypass footswitch connection,phase reverse switch and variable phase adjust capabilities.
The control panel is featured with input gain, 3-band semi-parametric EQ with variable mid-frequency,a three position low frequency filter and 180 DEGREE polarity reverse switches, to help eliminate acoustic hot spots that can cause audio feedback.
A balanced line input with LED indicator and level control has been included as well as a transformer isolated output to eliminate hum and buzz caused by ground loops,a 180 degree polarity reverse switch to bring both amps into phase and a dual ground lift switch for noise free operation.
Repair of contact between the stator and the reversing switch.
When you pull out the stator, see contacts on the stator and the reversing switch panel.
The structure of the electrical part of the motor,the power button with a speed controller, reversing switch, connecting wires.