Examples of using Current density in English and their translations into Slovenian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Computer
-
Official/political
-
Programming
Higher current density and current efficiency;
The meaning of this is to ensure uniform current density on all sides of the product.
(5) High current density and efficiency of the circuit;
Electrodeposition was carried out galvanostatically at current density of 15 mA/cm2.
The current density gradually increased from 0.05 to 0.1 mA/cm2.
High current efficiency, excellent corrosion resistance,long anode life, and high current density(up to 10000A/M2).
Electrocodeposition was carried out at a constant current density of 5.0 A dm-2 during 1 h using a DC power supply(5 A/30 V, BLAUSONIC FA-350).
Solve the problem of uniform plating of deep hole plating, high current efficiency,and can withstand 1000A/M2 current density.
Figure 7 presented that the capacitance retention of I-film at a current density of 6mA/cm2 can achieve 94.2% of initial value after 100 cycles.
Thus, under the current density of the population in the already constructed blocks(200 to 600 persons./ Ha), to build a house on the free"patch" it will be impossible.
Adjustment of nanoparticle size by varying parameters(ultrasonic power, current density, deposition potential and the ultrasonic vs electrochemical pulse times).
The current density increases, the metal begins to heat up more, and as a result, it will lead either to aluminum burning out at the junction, or, in the worst case, to a fire.
Under the same working conditions, the life of the noble metal oxidecoated titanium anode depends on the working current density, temperature and bath composition.
When the solution has a low alkalinity and a high current density, especially when the solution is contaminated with chloride ions, the steel parts can also be punctured.
Through galvanostatic charge/discharge experiments,it can be seen that the specific capacitance of I-film depends on the current density, and I-film exhibits high electrochemical stability.
It also has other advantages such as low current density, superior power saving, excellent stability, strong combination of coating and substrate and long working life.
Determine the use of Welding Cable specifications(conductor cross-section), the general should consider the heat, voltage loss,economic current density, mechanical strength and other selection conditions.
The reason is that larger current density results in shorter time of redox between Ag/Ag2O, so that ions have not enough time to diffuse from electrolyte and interphase[26].
More commonly, though, manufacturers optimize the size of the R,G and B subpixels to reduce the current density through the subpixel in order to equalize lifetime at full luminance.
At low current density, the decay of specific capacitance can be ignored while, at high current density, the specific capacitance decayed dramatically because of short time for the diffusion of ions.
Method of the General electrophoresis(by S. B. to Vermel)- electrodes placed on the interscapular region(area strip300 cm2), and in both calf muscles(150 cm2) at the current density of 0.03 to 0.05 mA/cm2.
In the electroplating process, since copper ions are easily deposited rapidly in the edge portion of the pores(that is,a high current density region), the deposition speed of the central portion of the pores(i.e., the low current density region) is relatively slow.
Due to the high amount of sewage oil produced by the catering, we use a micro-electrolysis treatment method to improve the treatment effect, that is, relying on its own material(generally metal scrap) to form a micro-battery to purify the wastewater,then the current density is 26a/m2.
When the current is injected into the earth through the grounding body, it spreads in the form of the current field, the farther away from the ground, the larger the hemispherical dissipation area,the smaller the current density in the ground, 15~ 20m away, the unit diffusion distance of the resistance and ground current density is close to zero, the potential has been zero potential.
Note: The“superconductive” state of a material is individually characterized by a“critical temperature”, a critical magnetic field that is a function of temperature,and a critical current density that is a function of both magnetic field and temperature.
Note: The“superconductive” state of a material is individually characterized by a“critical temperature”, a critical magnetic field that is a function of temperature,and a critical current density that is a function of both magnetic field and temperature.
It can sustain current densities six orders of magnitude higher than that of copper, shows record thermal conductivity and stiffness, is impermeable to gases, and reconciles such conflicting qualities as brittleness and ductility.
