Examples of using Maximum operating in English and their translations into Slovenian
{-}
-
Medicine
-
Colloquial
-
Official
-
Ecclesiastic
-
Financial
-
Computer
-
Official/political
-
Programming
Maximum operating overload 7.
This is also referred to as the maximum operating speed.
Maximum operating pressure of 2.5 bar.
The 2:17 series of has a maximum operating temperature of 350°C.
Maximum operating pressure of 3 bars.
The maximum surface speed(maximum operating speed) for fibre discs is 80 m/s.
Maximum Operating Pressure: 860 kPa.
Safety Management System for Gas Networks with maximum operating pressure up to and including 16 bar.
The maximum operating temperature of 180℃.
The maximum spread force is up to 8-14ton, maximum operating pressure is 700bar(HFSH-14).
Maximum operating speed- Klingspor.
Before choosing a neodymiummagnet be sure to consider your application's maximum operating temperature.
The maximum operating pressure is 350 bar.
You can drive on winter tires thathave a lower speed rating than your vehicle's maximum operating speed.
The maximum operating altitude was 18,300 m.
For safety reasons,the user should strictly ensure not to exceed the maximum operating speed specified on the abrasive.
The maximum operating pressure of the pumps is 0.3 Mpa.
ISO 5145 and a pressure regulator which admits apressure at least equal to 1.5 the maximum operating pressure(155 bar) of the gas cylinder should be used.
Maximum operating current(transmitted signal):< 15mA.
The China Standardized EMU, also known as Fuxing Hao,is an indigenous Chinese bullet train whose maximum operating speed reaches 350 km/h(217 mph).
The maximum operating temperature range is 95 degrees, with an allowable short-term temperature of 120 degrees.
The use of a bag filter requires a fabricmaterial selection suited to the characteristics of the off-gases and the maximum operating temperature.
The maximum operating speed is relevant to the following abrasive tools included in Klingspor's product range.
The use of a bag filter requires the selection of afabric suitable for the characteristics of the waste gas and the maximum operating temperature.
Guided by the maximum operating parameters of the device, you should purchase a solid multicore copper wire of the required length.
Sintered SmCo5 magnets are produced in a similar way as Sm2Co17 magnets,yet they have lower magnetization and also slightly lower maximum operating temperature.
The maximum operating temperature of such an installation is +90 degrees, so it is not used for the installation of heating systems.
The main advantages of cast AlNiCo magnets are high maximum operating temperature which can reach more than 500°C and also very good corrosion resistance.
The maximum operating speed of abrasive tools is the maximum speed at which rotating abrasives can be operated when fitted to the corresponding grinders during application.