Examples of using DIP switch in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Change the DIP Switch Settings.
DIP switch 1 and 2 Default setting.
About the DIP Switch Settings.
Data Compression Control DIP Switch.
DMX MODE 2: DIP Switch 10 in ON position.
People also translate
Periodic pump run: DIP switch 6.
U2 DIP switch for setting user code.
Heating or cooling mode: DIP switch 9.
The DIP switch is present on the serial interface.
Below that, it has an 8 position DIP switch.
DIP switch OFF: Time signal DCF77 from Frankfurt.
Select the appropriate protocol with the DIP switch combination.
DIP switch ON: Clock runs on built-in quartz.
Save the entry by pressing the DIP switch reset button.
DIP switch for 5V, 9V, and 12V adjustable output power.
Output frequency selection Frequency DIP switch 3 50 Hz OFF 60 Hz ON.
The DIP switch is located at the bottom of the paper holder.
It checks the print quality,ROM version, and DIP switch settings.
To set the DIP switch open the paper cover and remove the paper.
Synchronization by wiring/ optical synchronization selectable by DIP switch.
The DIP switch functions are described in'top to bottom' order.
Your input voltage and frequency DIP switch settings MUST match your input.
DIP switch is provided only for serial interface specification.
The amplifier uses the DIP switch settings to set the power requirements.
DIP switch Camera 1 DIP switch Camera 2 1 3 Function 2 4 Function.
An acceleration/deceleration ramp can also be enabled using a DIP switch.
Set the DIP switch to ON and press the DIP switch reset button.
Adjustment of the RollerDrive‘s direction of rotation- DIP switch- External digital signal.
DO NOT change the DIP switch settings when power is connected!
The multiRepeater also has DIP switch for disconnecting individual or all segments.