Examples of using LED illuminates in English and their translations into Spanish
{-}
-
Colloquial
-
Official
The LED illuminates when the unit is On.
This particularly energy-saving LED illuminates up to 24 hours.
The LED illuminates when the load state is on.
This particularly energy-saving LED illuminates up to 72 hours.
The LED illuminates when its corresponding area is armed.
Push the[AUTO] push button until the green LED illuminates.
Power LED- This LED illuminates when iO Hub is.
When the pitch slider is moved away from zero, the LED illuminates red.
An LED illuminates to indicate the selected fan speed.
If the signal level is too high, the CLIP LED illuminates.
This LED illuminates when the audio signal peaks in the channel.
When the effect processor is turned on, the corresponding LED illuminates.
When the LED illuminates the tool is ready for use.
Charging is complete after about 4 hours and the LED illuminates green FULLY CHARGED.
An LED illuminates the tank for a soft glow night light.
POWER LED INDICATOR- This LED illuminates when the power is turned ON.
The LED illuminates red and then turns off after you insert the battery pack.
Bend the pitch of your playing tracks until the green LED illuminates.
Power LED: This LED illuminates when the power is turned on.
Phantom Power Switch: When activated(in),15 VDC phantom power appears at each mic-level input and the LED illuminates.
If neither LED illuminates when powered on, check the Fuse in the Power Socket.
For added convenience a front panel LED illuminates to show when the FX Loop is active.
The LED illuminates green and then turns off if no battery pack is inserted.
Power/Standby LED: This LED illuminates when the subwoofer is powered on.
This LED illuminates when an audio signal is present at one of the inputs.
Pitch LED: This LED illuminates green when the pitch slider is set at 0.
When the LED illuminates red, the subwoofer's polarity is reversed from its default.
PeakStopPlus Threshold(+) LED Indicator- This LED illuminates when the output signal exceeds the level set by the PeakStopPlus LEVEL control indicating that PeakStopPlus limiting is occurring.
PROTECT LED INDICATOR- This LED illuminates if the power sound system output connection is shorted or the load impedance is too low.