Examples of using Correct side in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Open the box on the correct side.
Correct side clearance for race cornering.
Use target plate correct side.
Use the correct side for the hole diameter of the blade you intend to use.
Don't they step in to tell the correct side of the story?
Use the correct side for the hole diameter of the blade you intend to use.
Make sure that the contacts are located on the correct side.
Be sure to connect the correct side of the brass swivel adapter to the pump.
If you are a bilateral user, make sure your processor is used on the correct side.
Try to get the colored balls to the correct side of the cube. Controls.
Verify the correct side of the template is being used, then mark and drill holes.
I would not want to be the people driving on the correct side of the highway tonight.
Choose a correct side on which protrusion fits into the saw blade hole perfectly.
The pulmonary artery andaorta are cut and reattached to the correct side of the heart.
Verify the correct side of the template is being used, then mark and drill holes.
Now, obviously, you came here to do a lap,in a car with a steering wheel on the correct side.
This means that the dog jumps from the correct side no matter if the pole is knocked down fault!
Locate the Parallel Guide(1) onto the guide rods,so that it extends to the correct side of the.
Choose a correct side on which protrusion fits into the saw blade hole perfectly.
Make sure the plug for the shelf lighting is on the correct side for the electrical connection.
Slide the correct side onto the drive shaft(45) and lower the other end into the support slot near the release tab.
Your task- without delay, time to put on the correct side stick figures to form a"square.
Placing paper with pattern side down is especially important when cutting letters or words,so the pattern will be on the correct side.
If the specified file is used properly, the correct side plate angle is produced automatically.
The thrust block(23)ensures your workpiece is always guided to the correct side of the cutter.
Be sure that the sheet is inserted with the correct side up and that it is inserted in the correct direction.
Be sure that the cleaning sheet is inserted with the correct side up and in the correct direction.
Be sure that the sheet is inserted with the correct side up and that it is inserted in the correct direction.
If the specified file is used properly, the correct side plate angle is produced automatically.
Be sure the lower chamber divider rim is placed with the correct side up and is seated tightly to ensure the best seal possible.
