Examples of using Cutting method in English and their translations into Spanish
{-}
-
Colloquial
-
Official
It uses a completely new cutting method.
Another cutting method is to use a 4mm*50mm ruler.
The machine adopts rolling cutting method.
Traditional cutting methods has already out of style.
For this reason, we choose to use the cold cutting method.
Water jet cutting method is the earliest water.
The label edges will not fray due to our hand cutting method using heat.
Shear knives cutting method especial for paper slit.
Fit the universal wall mounting for the required cutting method See the separate manual.
CUTTING METHOD:- Cut with the left front of the disc.
Choose the appropriate hair cutting method on the quick-start CD-ROM.
Cutting method, strong cutting force with low noise.
It is an extremely flexible cutting method for processing complex workpieces.
This cutting method is suitable for cutting glass, ceramics and other materials.
Consult with the solid surface manufacturer for the correct cutting method needed.
Ten cutting methods and cut-off wheel database included.
The width of both zones depends on the cutting method and cutting parameters.
The safest cutting method is to cut with the bottom part of the chain.
Wide pipe application range, modular design, high rigidity, pneumatic clamp,planetary cutting method.
Various cutting methods have their disadvantages, in industrial production has a certain scope.
The entire shoe is not played through using the above cutting method, in fact, if six decks are used, 2 entire decks may not be played at all.
The cutting method from above and at an angle downwards leads to direct weight relief for the operator.
Typically, the amount of lubricant use is less than 50 ml/h, depending on the cutting method, the material to be cut and the machine setting.
NOTE: This cutting method also requires that specific bevel angles are set- see Cutting Crown Molding on page 45.
Silver Stream Marble which is extracted from thesame deposit as the Thassos Snow-white, varies only in its cutting method, while conserving all the physical characteristics of the marble itself untouched.
Slice and Scoop” Cutting Method Always wash the mango before cutting and use a clean knife and cutting board.
With small sections the thermal energy generated by the cutting method and the possible preheating 8 BEHAVIORS OF STEEL IN THERMAL CUTTING accumulates in the cut section, which slows the cooling process.
Cutting method could be partial cut or full cut,“Partial Only”is set to valid by the default memory switch 4-8, so that the full cut command will execute as partial cut operation.
In order to find the best cutting method, it is advisable to contact our Technical Customer Service or the cutting equipment manufacturer.
Specify the cut method and the number of copies to be printed.