Examples of using Direct current in English and their translations into Spanish
{-}
-
Colloquial
-
Official
A simple direct current(DC) motor is illustrated here.
Sealed-off laser device stimulated by direct current.
Direct current is power that flows only in one direction.
Charles Broadwick, like Holland,a champion of direct current.
Direct current electrode negative is often expressed as DCEN.
Weld of shields of a direct current motor, Hp 200.
Or DC direct current or AC/DC alternating or direct current. .
This does not occur during the steady flow of direct current.
Switch for direct current/alternating current, continuity.
The 64 hexagrams are equivalent to 16 cycles of direct current.
Direct current alternating or direct current. .
The button MODE also allows to return to the direct current measurement.
Direct current alternating or Class I Construction direct current. .
This type of engine is also known as a direct current motor.
Direct current 12-volt will burn out the circuits in a cellphone in a microsecond.
After switching on, the direct current meas urement will always be activated.
Direct current alternating or direct Class I Construction current. .
Measurement of electric equipment up to 750 kV direct current insulation resistance.
The direct current is characterised by an unidirectional flow of electrical charges.
The input power needed for this player is 9 volts Direct Current.
Measuring direct current: Set the measuring range selection switch to“µA” or“mA”.
The input of the current transmitter is able to perform direct current measurements.
Direct current measurement- Select the range of direct current with the rotary switch of the.
For a good diode there is a considerable change in the pointer for direct current(LI scale) and a short change for reverse current LI scale.
In the direct current is almost equal to the real power but in the alternating current it can be different depending on the power factor.
VascuTouch is an"electrocoagulation" system using a combination of direct current and radio-frequency ablation to coagulate or melt off the skin imperfection.
Direct Current Reverse Polarity The reverse polarity is used for welding alloys covered with a layer of refractory oxide with higher melting temperature in comparison with metals.
This bioenergy indicates a static discharge of bioenergy as direct current, related to general emotional release, or release of bioenergy from physical stress.
Basic scheme plans to enter a direct current through two electrodes, traditionally called"A" and"B" and measure the voltage between the electrodes"M" and"N.