Examples of using External temperature sensor in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Input: input for external temperature sensor.
External temperature sensor is disabled/ enabled.
Operation time with an external temperature sensor.
One external temperature sensor is connectable.
Optional External Temperature Sensor section 2.3.2 on page 3.
An external temperature sensor can also be connected if desired.
Up to 2 anemometers,1 wind vane and external temperature sensor.
An external temperature sensor can also be connected if desired.
Radio Alarm clock with projection and external temperature sensor included.
An optional external temperature sensor can also be connected.
Measured temperature range for the external temperature sensor.
An external temperature sensor occupies far less space than a logger will.
This is the case when you want to install the optional EKRTETS as external temperature sensor.
You can use an external temperature sensor provided.
For an extremely accurate temperature reading,pair it with our tempe™ external temperature sensor.
It can be used as external temperature sensor for the products.
Grafica offers a built-in temperature sensor and an optional external temperature sensor.
Third external temperature sensor(not included with double baking chamber).
It measures the internal temperature, or an external temperature sensor(JB-TS-PT1000).
If you have an external temperature sensor, make sure it is attached to the battery.
Room limit: The thermostat controls room temperature while using the external temperature sensor as a limit sensor. .
The connection of an external temperature sensor is required to activate this mode.
External temperature sensor for underfloor heating(wet rooms or bathroom heating).
The thermostat type UCCG-9991 has an external temperature sensor that is normally placed in the floor construction.
Can be used as external temperature sensor for the products:- JB-EXT-TH-R- JB-EXT-TH-B See.
Only if the optional temperature sensor EKRTETS is not installed as external temperature sensor, the RKRTR can be used as a table-top model.
In that case,install the external temperature sensor where you want to control the ambient temperature. .
On the RoCon+ HP controller,set the[External temperature sensor] parameter to"On" Main menu Configuration Sensors. .