Examples of using Input jacks in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Input jacks for the channels 1 and 2.
To the component video input jacks.
Chinch input jacks for the phono/line channel 5 31.
Connect these to the amplifier‘s TAPE input jacks.
Input jacks are located on the rear panel.
Attach the antennas to the antenna input jacks.
Microphone input jacks with priority for the driver.
Function switch 6. mA, µA and 10A input jacks 7.
Dual¼" input jacks(both active and passive instruments supported).
This function is only available for the LINE input jacks.
Pin configuration of the input jacks CH1- CH4(22) XLR.
DO NOT use input jacks when the amplifier is working as slave.
Play audio compatible with the input jacks on this unit.
Input jacks on a playback device are connected.
Connect these jacks to the input jacks on your amplifier.
DO NOT use input jacks when the amplifier is working as slave.
You can select among external sources connected to your TV's input jacks.
Dual¼" input jacks(both active and passive instruments supported).
Connect your camcorder to the input jacks of the recording device.
The input jacks(INPUT 1 and INPUT2) are on the rear panel.
You can connect a variety of equipment to the many available HDMI input jacks.
It also has two input jacks, to which you need to connect your extractors.
Connect the RCA audio output jacks of the player and the analog audio input jacks of the unit with analog audio cable.
The input jacks are different on the R-N303 Europe model and on the R-N303D p. 7.
Connect the player to the analog audio input jacks of the unit with analog audio cable.
It provides video input jacks that allow the host device in which the MY8-AEB is installed to be synchronized to a video signal.
You will notice that the input jacks and channel controls are color coded.
When using rear input jacks, disconnect the cables from the front jacks. .
In the Game mode,you can use front input jacks with suitable picture adjustments for video games.
Ensure that the test leads are fully seated in the input jacks and keep fingers away from the metal probe tips when taking measurements.