Examples of using Maximum data rate in English and their translations into Spanish
{-}
-
Official
-
Colloquial
Maximum data rate up to 867 Mpbs.
Old dial-up modems have a maximum data rate of 56 Kbps.
Maximum data rates up to 8Gbps.
Some codecs allow you to specify a maximum data rate for a movie during capture.
Maximum data rates up to 1Gbps.
The interface port complies with the USB version 2.0 specification i.e., maximum data rate of 480 megabits per second.
Delivers maximum data rates of 2.2 Gbps.
The SFP supports multimode fiber cable with a maximum distance of 550 m or 1804 ft., and maximum data rates of up to 1.25Gbps.
Delivers maximum data rate of 1.7 Gbps.
The SFPs support autonegotiation,a maximum distance of up to 100 m(328 ft.), and maximum data rates of up to 1000Mbps.
Delivers maximum data rate of 1.2 Gbps.
The SFP supports auto-negotiation,maximum distance of up to 100 m(328 ft.), and maximum data rates of up to 1000Mbps.
Maximum data rates up to 100Mbps.
If a 4×4 MIMO access point is used for a wireless client with a 2×2 MIMO device, the maximum data rate will only be 869 Mbit/s.
Maximum data rates up to 11.1Gbps.
It complies with standards IEEE 802.11n with data rate up to 150 Mbps, andIEEE 802.11b/g with maximum data rate of 54 Mbps.
Maximum data rates with minimum installation effort.
The SFP transceivers support multimode fiber cable with a maximum distance of 550 m or 1804 ft., and maximum data rates of up to 1.25Gbps.
It provides maximum data rates of up to 1.25Gbps.
If the device shows good signal strength in all your Signal Strength indicators, butthe airFiber5 link isn't able to modulate at maximum data rate for these signal levels.
Maximum data rates with minimum installation effort.
The SM fiber transceiver module supports Digital Diagnostics Monitoring(DDM),a maximum distance of up to 10 km(6.2 mi.), and maximum data rates of up to 10Gbps.
They provide maximum data rates of up to 1.25Gbps.
The MM fiber transceiver module supports Digital Diagnostics Monitoring,a maximum distance of up to 300 meters, and maximum data rates of up to 10Gbps.
You can set the maximum data rate to control the size of the recording.
In the low-data-rate mode, data can be transmitted directly to ground stations using X-band frequency.Because of narrow band width in the X-band downlink frequency, the maximum data rate in this band is limited to 120 megabits per second.
What is the maximum data rate for transmission using a slip ring?
The 2006 revision improves the maximum data rates of the 868/915 MHz bands, bringing them up to support 100 and 250 kbit/s as well.
The reason for this usage is that according to Hartley's law, the maximum data rate of a physical communication link is proportional to its bandwidth in hertz, which is sometimes called frequency bandwidth, spectral bandwidth, RF bandwidth, signal bandwidth or analog bandwidth.
With realtime signal processing, nothing goes undetected For maximum data rates in both transmission directions, all components- e.g. power output stages in the CMTS, line amplifiers, optoelectronic converters and cable modems must be operated within tightly specified ranges.