Examples of using Pipe surface in English and their translations into Spanish
{-}
-
Official
-
Colloquial
Painting on the pipe surface after cutting.
D geometry projected or surface mapped on the pipe surface.
Painting on the pipe surface after cutting.
Uniform plasma coating applied to the melt pipe surface.
Firstly, the pipe surface was cleaned and roughened.
Explosion protection temperature(pipe surface) min.
Firstly, the pipe surface was cleaned and roughened.
D geometry projected or surface mapped on the pipe surface.
If the pipe surface rust return, should be re-pre-cleaned.
To 85°C(No freezing on the pipe surface)*2 Maximum rated flow.
Electrostatic powder coating technics:To process the pipe surface.
The pipe surface was cleaned and roughened to the required standards.
Upper roll should only touch the pipe surface.
Dust attached on the pipe surface should also be cleaned clearly.
Highly conformable, while creating a positive union to any pipe surface.
An exact replication of the pipe surface can be produced in this way.
Do not stick any protective foils or plastics to the pipe surfaces.
Care must be taken not to penetrate pipe surface with upper roll by applying excessive pressure.
Oil, welding slag, burrs,grease and dirt on pipe surface.
LEDS-C4 Pipe surface spotlight 1L GU10 manufactured in white extruded aluminium and fixed light.
The WL 312 trainer studies convective heat transfer on various pipe surfaces.
The unique‘slide easy' gasket provides maximum sealing pressure, even on scored,pitted and corroded pipe surfaces through its distinctive circumferential ribs offering a simple installation and guaranteed seal.
The combination of tenting and disbondment permits a corrosive environment around the outside of the pipe to enter into the void between the exterior coating and the pipe surface.
Figure 6 shows the mechanical room with a superimposed thermogram andthe adjacent table shows the pipe surface temperatures using the average within an area.
The versatile range is pre-assembled with an innovative gasket which has'slide easy' ribs to reduce friction on pipes at the upper tolerance range of the fitting, providing maximum sealing pressure, even on scored,pitted and corroded pipe surfaces.
In gas production, reactions can occur with steel pipes, particularly with wet gas,resulting in corrosion with a mercuryrich layer being deposited on the pipe surface.
In this way, pipes surface could be heated even.
Piped surface water in house/garden.
The innovative probe stabilization system combined with a contoured removable delay line andirrigation features provides excellent sound transmission on piping surfaces as small as 4 inches in diameter.