Examples of using Pipe surface in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Internal Pipe surface spray.
Anti-corrosion coating on steel pipe surface.
Painting on the pipe surface after cutting.
ERW pipe surface quality is much better than the seamless steel pipeline.
After the pre-cleaning operations, the pipe surface not smooth.
Pipe surface prepared up-to a level of Sa 2 or 2½ or St 2/st by sand blasting.
Dust attached on the pipe surface should also be cleaned clearly.
Above 21℃ to enhance conformability of the outer-wrap to the pipe surface.
According by usage can be divided into the sleeve pipe, surface casing, casing and production casing.
Are made of ABS material to ensure that the water atomized state will not damage the pipe surface.
ASTM A358 CL4- Same as Class 3 except that the weld pass exposed to the inside pipe surface may be made without the addition of filler metal.
When these bands are used on thermally insulated pipes, they must be installed under the insulation and always in contact with the pipe surface.
Same as Class 3 except that the weld pass exposed to the inside pipe surface may be made without the addition of filler metal.
Rubber roller and steel pipe surface are covered by wear-resistant rubber, specially grinded in intermediate-high grade, causing excellent working of the anilox roller.
Use a magnifying glass to visual inspection of each tee, four-way, pipe surface is smooth.
HEF-301 has high sensitivity for discontinuities of metal materials, such as cracks on copper pipe surface, puckers and scars of steel pipe, pits, scratches, wear scars, transverse fissures or separation layers etc.
High precision 3 layers Co-extrusion die head, welding seamless, no dead angle, to ensure the produced pipe surface smooth and qualified.
The brushing time should be control within 6 hours between the pipe surface treatment and brush primer. During brush primer, pipe surface should be free from damp and pollution. If the pipe surface rust return, should be re-pre-cleaned.
The inner-layer tape shall be applied directly onto the prepared pipe surface using mechanical constant.
Hot-dip galvanizing is the first steel pickling, in order to remove the steel pipe surface of iron oxide, pickling, aqueous solution of ammonium chloride or zinc chloride or ammonium chloride and zinc chloride mixed aqueous solution tank cleaning, and then send into the hot dip tank.
Please note the application condition, material of the pipe and the density of the pipe surface will affect the life the heater.
Polyethylene and butyl rubber based anti-corrosion wrapping tape can be used for the purposes of steel pipe surface corrosion resistance for various pipelines in facility projects of petroleum, petrochemical industry, city gas, oil and gas storage and transportation, power, water supply, metallurgy, civil aviation, etc.
TheCoating materials primer for pipes xunda p27 is quickly drying applied to the appropriately prepared pipe surface before application of inner layer tape.
Anti-corrosion coating on steel pipe surface is vital for steel pipe service time. Same steel material pipes, some can stay well underground for decades while some start leaking in several years. The main reason about this is that they have different anti-corrosion coating on the surface. Polyeth….
Can cut beveled end surface pipe ends.
On the surface of pipe, primer, tape etc.
Keeping the pipe external surface clean and dry. Remove the dust.
High quality viscose fiber material, because of its special molecular structure, it is like the pipe of surface air circulation of the fabric, guaranteeing the oxygen content and locking the moisture.