Examples of using Probe tip in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Wafer, die and probe tip alignment.
The probe tip is the most delicate part of the thermometer.
Sensor(located at probe tip) Options.
The probe tip may be too far away from the surface.
Figure 2- 5:Using a Probe Tip as a Test Point.
People also translate
Double probe tip glued in contact point⌀ 1 mm 9 mm GARANT Art.
Sensor(located at probe tip) Options.
The probe tip must be placed entirely on the natural tooth.
Explain when a probe tip must be changed.
Each block has a test connection point for the probe tip.
Insulated probe tip extender rated up to 3A.
The core element of HM 160.91 is a probe tip or a hook.
Ensure the probe tip and shroud are clean.
Drop-shaped probe tip for energy-saving probing. .
The display should also indicate a reading of“0.0” with the probe tip floating.
Touch the red test probe tip to the positive side of the circuit.
The right-angle adapter is attached the same way as the push-in probe tip, and can be easily removed by hand.
Place the probe tip of the TIC 300 PRO against the hot prong of the outlet or switch contact.
Non-contact eliminates the need for probe tip compensation Applications.
The probe tip is the most fragile portion of the thermometer and the soft lens is very delicate.
The“RED/GREEN Polarity Indicator” lights-up when the probe tip voltage matches the battery voltage within± 0.5 volts.
Connect the probe tip with the BNC adaptor to the oscilloscope's signal generator output.
Continuous visual(blue LEDs) and audible rate will register when the probe tip makes contact or very close to the high voltage line.
Insert the probe tip below the top most refrigeration line in the middle of the coil.
If any damage occurs to the sensor inside the probe tip or to the unit itself, return the product to your local distributor.
The probe tip may be removed and reused by desoldering it from the circuit, and soldering it into another circuit in the future.
Includes three useful probe tip accessories(magnetic pickup, pickup hook, 45 mirror), A/V cable and lens cap.
For meats, the probe tip should be inserted into the center of the thickest part of the meat.