Examples of using Red LED flashes in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Switching off Red LED flashes 2 times.
Red LED flashes to alarm Specification.
LEDs ON: The red LED flashes three times.
Move the glasses until the red LED flashes.
The red LED flashes during uploading.
Green LED lights up and red LED flashes.
The Red LED flashes once a second.
When the battery level is low, the red LED flashes.
Red LED flashes after connecting the battery.
Low battery status Red LED flashes 2 times every 2 seconds.
The integrated buzzer emits an audible signal and the red LED flashes.
Powering Off Red LED flashes 5 times rapidly.
Step 4: Do the same thing with the 2nd communications system until the red LED flashes quickly on this one too.
A red LED flashes slowly when in operation.
Include/Exclude: Triple click, the red LED flashes 3x then.
If red LED flashes it has failed to learn the code.
When the water is off, the Red LED flashes once every 5 seconds.
The red LED flashes when the battery voltage is low.
Fully automatic mode press key, red LED flashes for approximately 3 seconds.
The red LED flashes in the pattern indicated on the label.
During this phase,first the red LED flashes, then the blue LED flashes. .
The red LED flashes during charging and turns off after.
Low Battery Red LED flashes at 3 second intervals.
Red LED flashes briefly and Green LED does not flash. .
Alarm mode: red LED flashes and an acoustic alarm.
Red LED flashes rapidly(f 4 Hz)“12 h ON” function is enabled via remote control;
Note: The red LED flashes twice to indicate low voltage.
The red LED flashes quickly(f 4 Hz) EEPROM has saved data from the remote control settings.
Power LED- This red LED flashes while initializing and illuminates when the unit is turned on.
Red LED flashes slowly(f 0.5 Hz) night operation(Ambient lighting is lower than the default light value); connected lighting is ON.