Examples of using Same subnet in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Neither of them are on the same subnet.
Be on the same subnet and same channel.
All are located on the same subnet.
The SCAN addresses must be on the same subnet as virtual IP addresses and public IP addresses.
All the devices are in the same subnet.
The address should be set in the same subnet as IP address within LAN in which the subnet is set.
Auto-discover devices of the same subnet.
If you attach two ormore network interfaces from the same subnet to an instance, you may encounter networking issues such as asymmetric routing.
Both machines must be connected to the same subnet.
Q: Prompt"are not in the same subnet” when Scan QR code?
Make sure the PC andthe camera share the same subnet.
You assign an IPv6 address to a network interface in the same subnet, and attach the network interface to your instance after launch.
Set the laptop and the airRouter in the same subnet.
If the instance has two or more interfaces on the same subnet, search for information about using routing rules to work around asymmetric routing.
You are recommended to locate both TV and PC in same subnet.
This is useful, for example,when you have the same subnet on both sides of a WAN connection.
The three license manager computers should be on the same subnet.
Next enter that IP address into a web browser on a computer on the same subnet to view the Access Point's system status or change its configuration.
To configure a private vSwitch,use static IPs for all VMs and place them on the same subnet.
If multiple Tutors are attempting to use UDP/Broadcast Show simultaneously on the same subnet, it is recommended that each uses a unique port to avoid conflict.
Therefore, in this scenario,all instances assigned to a security group are in the same subnet.
Network Agent exchanges messages with other Network Agents in the same subnet and then sends Administration Server information about itself and other Network Agents.
XPrintServer will auto-discover all network(wired and wireless)printers located on the same subnet.
The product model shown in this QIG is“TL-SG2008", as an example To log in to the switch,the IP address of your PC should be set in the same subnet as that of the switch The IP address is 192 168 0 x(”x” is any number from 2 to 254) Subnet Mask is 255 255 255 0 For details, please refer to Appendix B in the User Guide on the resource CD.
If a DLR does not separate the VMs,the underlying IP addresses configured on the VMs can be in the same subnet.
Turn on the VM andprovide the VM NIC with an appropriate static IP from the same subnet to setup a network connection.
Your load balancer resources should reside in the same VPC as your container instances andthey should be configured to use the same subnets.
NOTE: Once the radio reboots, it can be accessed on its default IP address of 192.168.1.20,provided you are on the same subnet and local to the radio.
Acquire an unused IP address for your AXIS 231D/232D.AXIS IP Utility detects the subnet your computer is connected in. The AXIS 231D/232D must be installed on the same subnet.
Normally, in order to contact the Diva 2440 through TCP/IP,your computer's IP address must be on the same subnet as the device.