Examples of using Selected memory in English and their translations into Spanish
{-}
-
Colloquial
-
Official
The data of the selected memory are loaded.
Selected memory will be used for all modes.
The settings are saved in the selected memory.
Data table of selected memory card formats.
It is active when written into selected memory.
Display of the selected memory in the display at position A» Fig. 28.
Format Delete all the data in the selected memory.
The display of the selected memory varies depending on vehicle equipment.
The current data is stored under the selected memory number.
The display of the selected memory is displayed at the position indicated by the arrow» Fig. 22.
The number is saved in the selected memory location.
If the selected memory becomes full, the device saves the videos in another memory. .
Press button or in the selected memory bank. or.
The adjusted channel levels have now been memorized into the selected memory.
I have fallen off a pedestal and your selected memory is really quite incredible to.
Press the PROG/MEMORY button again to set the station in the selected memory.
Driving time Display of the selected memory in the display at position A» Fig. 28.
Step 4:The software starts scanning the selected memory card.
To save a station press the selected memory and Option, Edit and enter Name and Frequency.
Press the menu button 2 to confirm the selected memory group.
LOW BATTERY INDICATOR:When the selected memory bank LED blinks, this will indicate that there is a low battery or no battery in the PDM-03.
This unit loads the settings stored in the selected memory number.
By clicking on the Send button it sends the selected memory to the device.
Press the menu button 2 to confirm the selected memory bank.
The TFT display will show the files stored in the selected memory device.
This will begin a slideshow with pictures from the selected memory source.
Delete All Permanently deletes all the data in the selected memory source.
The result will be stored automatically in the selected Memory Zone.
By pressing MEM once again,the present measurement results will be recorded in the selected memory address occupied or otherwise.
