Examples of using Set button once in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Press the Set button once briefly.
Save your setting by pressing the SET button once again.
Press the SET button once and then.
Confirm your setting by pressing the SET button once again.
Press SET button once(3) to select the year.
Press the Time Set button once.
Press the Set button once and“LOAD” will appear in the LCD.
Confirm your selection by pressing the SET button once again. Note.
Just press the SET button once for object“present” and“not present”.
Leave transmitter in neutral position and press the SET button once.
Press the CLOCK SET button once more.
Hold full brake on the transmitter and press the set button once.
Press the ALARM/SET button once more to turn off the alarm and.
If you do not wish to complete this selection,just press the Set button once.
To make small changes,press the SET button once for each minutes.
Press the Set Button once and the hour will start flashing, then press the Plus.
When the clock shows“0:00”, press the Set Button once and the hour will start flashing.
Hold full brake on transmitter and press the SET button once.
Press the Set button once; the small word“MENU” will appear above the frequency.
When the clock camera is powered on, press the Set Button once and the year will start.
Now press the SET button once more and ALERT and will appear on the lower part of the display and the humidity indicator will blink.
The ESC will beep,leave the throttle trigger in neutral and press the set button once.
With the meter turned off, press the SET button once, and the latest result in the memory will be shown.
To“back out” without making a frequency choice,simply press the Power/Set button once to exit the menu.
Press the Set button once to exit the Menu mode and return to normal operation, with all factory-default settings restored.
To“back out” of the Manual Frequency Set mode without making a frequency choice,simply press the Power/Set button once to exit the menu.
Press SET button once(no longer than 1 second) and that digit will increase by one each time SET is pressed.
To activate this frequency selection, press and hold the Set button until the word“STORED” appears in the transmitter's window. If you do not wish to complete this selection,just press the Set button once.
