Examples of using Using wire in English and their translations into Spanish
{-}
-
Colloquial
-
Official
When using wire cup brush, mount urethane.
This is applicable for all robotic mowers using wire.
When using wire cup brush, mount urethane.
Clean the drip holes using wire or a blunt pin.
Avoid using wire or metal brush cleaning cloth regiment.
Wear protective gloves and face shield when using wire or bristle.
The benefit of using wire is that many shapes can be formed with it.
The unit can be installed in a suspended ceiling using wire as shown.
When using wire cup brush, mount urethane washer to the spindle.
Livestock house can be designed using wire, fencing hardware and hay.
In large bowl, mix oil, lemon juice, basil,salt and pepper, using wire whisk.
Such characteristic is obtained by using wires with different shrinkages. ANGORA.
Cleaning of metal surfaces can be done on the left side of the grinder using wire wheel.
For the outdoor speakers we recommend using wire that is rated for outdoor use. .
Richard Lippold(May 3, 1915 Milwaukee, Wisconsin- August 22, 2002) was an American sculptor,known for his geometric constructions using wire as a medium.
For the outdoor speakers we recommend using wire that is rated for outdoor use. .
Using wire and- probably- weights or springs, his machine pulled his index and middle fingers upwards and backwards see the diagram of the contemporary 1836 Dactylion, for the principle.
The four year old pupils participated in the decoration using wire, paint, plastics.
Ground pump permanently using wire of size and type specified by approved local or national codes.
This class will teach you basic stringing techniques using wire, crimp beads and toggle clasps.
Connecting the starter battery The starter battery has to be connected using wire of at least 2.5mm2.
Y9 have recently completed a sculpture project using wire, sticks and Mod Roc; decorating using a dry brushing technique.
You can't use wire.
Use wire to fasten the elements.
Some garage door openers use wire connectors instead of DIP switches.
Chester used wire to hold the muff pieces together.
S Never use wire, rope, string.
Use wire of adequate size to minimize voltage drop at the motor.
Use wire with a cross-section of 0,75mm².
Use wire of adequate size to minimize voltage drop at the motor.