Examples of using Operating current in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
Operating current: 150mA.
Note that pin 4 requires an operating current of at least 40uA.
Operating current: the maximum is 150mA.
Lower power consumption: Maximum operating current not exceeding 50mA.
Operating current: the maximum is 50mA.
People also translate
Lower power consumption: Maximum operating current not exceeding 50mA.
Operating current: the maximum is 50mA.
All self-limiting cables have a starting current which is higher than the operating current.
Average operating current:>55mA.
with a duty cycle of 60% operating current is 150A.
Circuit operating current of about 25± 5mA.
Fluorescent bulbs require a special power supply called a ballast that is needed to regulate bulb operating current and provide a compatible start-up voltage.
Average operating current: Less than 55mA.
if it is frequently off in the air, under operating current, so that form the the surface film that can increase the contact resistance.
Maximum operating current: 25A(can customize).
Luma can be programmed to keep the flux of the LEDs at a predefined constant level over the lifetime of the luminaire- by increasing the operating current over time to compensate for the LED lumen depreciation.
Maximum operating current: 25A(can customize).
a wide range of operating current, can withstand impact of stipulated current and movement load.
Maximum operating current: 25A(can customize).
low operating current, Single DC power supply, low price, high performance.
Operating current:≤70mA when the lock is not driven.
low operating current, Single DC power supply, low price, high performance.
Max operating current and operating time.
Operating current leads to an overload on the LED module.
I have replaced the ordinary triode tube D40 8050, with operating current 60~ 80mA, but the firing distance of less than 1.5km, so if the switch from 9018, operating current is smaller, shorter firing distance.
The operating current with on-state of the LEDs remains constant.
Operating current: normal mode is 50mA,
Operating current leads to an overload on the LED module EOS.
The operating current and the corresponding work with lower power dissipation.
The representation of the operating current corresponds to the visual impact of the constant current dimming(CCR)