Examples of using Pipe length in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
Pipe length range(mm).
Not exceed 0.2% of the pipe length.
M pipe lengths; easy& fast installation.
Not exceed 0.2% of the pipe length.
Pipe length depends on the capacity of the pump,
If you want to bend the pipe length should not exceed 5 meters;
long pipe lengths.
If your single pipe length more than 8 meter,
long pipe lengths.
Pipe lengths are inserted into the fitting, and are turned on for¼ of a turn to more evenly distribute the adhesive on the pipe surface.
The last three digits of the article number represents to the pipe length, e.g. 50 630-305 305 mm.
Raw material Black steel pipe Length of Pipe: Usually 6 meters as pipe length, but according to buyer's special need, we can make it 4 meters to 8 meters as Pipe length.
It is also possible to set default values on anything from pipe length to a pump or valve.
of heating private houses, which will be exactly the specified location of the boiler and radiators, pipe length, and more.
The last three digits of the article number represents to the pipe length, e.g. 50 630-305 305 mm. Cut lengths for straight valve c/c.
If the clamping force is too large, the pipe is easily deformed, the clamping force is too small, and the pipe length is longer.
In case of single unit It is not necessary to charge with additional refrigerant until the charge less pipe length in the table 2. If the pipe length is exceeding the charge less pipe length, charge with additional refrigerant amount per 1 m according to the equivalent length.2.
cutting pipe length 6m, pipe diameter 20mm~300mm.
not in advance can determine the exact sizes of the pipe length.
In this construction, floor heating the coolant return point is exactly in the middle of the pipe length, and the average temperature is unchanged in any part of the floor.
with 450 mm pipe length from the lower edge of the PU block and with 700 mm pipe lengths from the lower edge of the PU block.
M piping length without additional refrigerant charge.
Piping length for flexible design and installation.
Increased piping length for greater design flexibility.
Piping length up to 30 m.
Maximum piping length: 100 m(120 m equivalent).
Empty Increased piping lengths and design flexibility Adaptable to various building types and sizes.
It has a piping length of up to 220m(721.79ft)
Maximum piping length up to 50m, minimum piping length is 5m.
Refrigerant Piping Size and Allowable Piping Length Check if reuse of existing refrigerant piping is possible based on the following chart.