Examples of using Support plate in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
Part 2 and 3- vertical support plates.
Support plate for large filter baskets(over Ø 200 mm).
Traditional M-type squeegee(without support plate).
Lift the support plate -1- to use the collapsible wheel chocks.
You will have to get two fingers through the upper holes in the support plate.
Films, support plates and development impact doses and image quality.
Impellers, housings, inlet nozzles and support plates can be freely configured.
You're going to have to get two fingers through the upper holes in the support plate.
A support plate is a simple
The practical edge storage system"storEdge" can be additionally equipped with a support plate.
The floor is with Aquaproof support plate which provides increased protection against humidity due to moisture.
Threaded bushings are located in the bottom housing plate and are used to fasten the device to a support plate or other similar base.
The jig comprises a support plate(1) and a holder(2) with two clamps(3) for the scissors.
120-mm systems, although the support plate will need some more time.
Convenient-bearing support plate suspended on four suction cups that ensures a strong hold
adjust the support plate until you have the right angle.
TS cylinder support plates should always be used when the cylinder base is placed against hard material though the cylinder base is made of aluminium too!
The rotation of the stone presses the scissor blade towards the support plate, so you can concentrate on moving the scissors across the stone with full control.
Sam"Suitcase" is both the support plate, and plastic from which it is made,
In 2013, Plet began to engage in the research and production of support plate squeegee, and established the SPS brand squeegee,
first raise the support plate -1- Fig.1
Automotive industry: supporting plates, parts of headlights,
The supporting plate enables flexible mounting from 1 mm up to 40 mm thickness for stainless steel sinks and ceramic washbasins.
Also, they provide a supporting plate to place brushes